A105 Carbon Steel Tee for Water Supply
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPaintingPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
This water supply tee listing identifies carbon steel and A105, with GOST and forged references. The original image shows a tee form, while the selectable type is labeled Reducer. Confirm which ordered component the drawing covers before using the listed range or accepting a material designation.
Resolve welded and BSPT end wording
The title includes both Welded and BSPT Threaded, whereas the table records Welding and gives no actual thread designation. These entries do not establish one supplied end arrangement. Request the end drawing, mating connection details and applicable inspection requirements for the selected component.
If threaded ends are requested, confirm the actual thread designation, dimensions, tolerances and mating interface. If welded ends are selected, agree the end preparation and joint requirements. Do not derive either arrangement from a generic size option or treat the two terms as interchangeable.
Identify the GOST and material scope
Specify the GOST number, edition and component coverage required for the project. An unnumbered standard reference does not demonstrate conformity. Obtain the supplied grade, condition and traceability documentation; the A105 title and a234wpb option do not themselves identify one certified material package.
Provide run and branch sizes, outside diameters, wall requirements, center-to-end dimensions and tolerances. Clarify the Equal and Hexagon fields against the actual drawing, and agree units despite the Metric table and inch-based range. Define the Painting treatment, covered surfaces and inspection acceptance separately.
Define the water system operating envelope
State water composition, treatment chemicals, contaminants, temperature, pressure, transients and external loads. High Pressure and Other class leave numerical limits unspecified. Check material and joint suitability for the actual system, including any required water-contact approval, then agree dimensional and end inspections, documentation, marking, preservation and delivery.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
