GOST 17376 Forged Steel Equal Butt Weld Tee
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPlainPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
This GOST 17376 forged steel equal butt-weld tee enquiry concerns oil and water supplies. Both actual variants are labelled Reducer, so confirm the ordered family before procurement. The title and Equal table entry do not establish that the existing options represent the intended three-end tee.
Define the GOST tee or actual two-end component
Request supplier confirmation and an accepted drawing. For a tee, identify all run/branch nominal sizes and equal or reducing geometry. If a reducer is supplied, obtain its correct two-end specification. Preserve the existing option labels pending reconciliation rather than treating the two families as equivalent.
Obtain outside diameters, bores, wall thickness, center-to-end dimensions and butt-weld preparation for the confirmed shape. The half-inch-to-110-inch range is a catalogue context, not selected end dimensions. Custom length, height and mounting-hole entries provide no measured values or evidence of a hole feature.
Complete GOST and material traceability separately
Confirm the applicable GOST 17376 edition and selected configuration coverage, then agree the full material designation and governing material document. Carbon Steel/a234wpb options are labels rather than certification. Do not assume the option alone establishes acceptance under the intended GOST specification.
Request condition, heat traceability, material certificates and forging evidence. No wall schedule or seamless designation is recorded. Resolve Hexagon against the drawing, establish actual end details instead of relying on Customized Size thread wording, and define inspection of the plain finish and any specified treatment.
Assess the actual oil or water supply conditions
Provide medium composition, pressure, temperature, corrosion exposure, cycling and loads; obtain potable-water approval if relevant. High Pressure and Other class do not establish accepted numerical limits. Agree compatibility, joining, alignment, support, inspection, marking, material/process/dimensional records, warranty terms and quotation scope after the component is confirmed.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
