Painted Carbon Steel Equal Tee for Welding
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPaintingPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
This painted carbon steel fitting is described as an equal tee, with B16.9 and A234 WPB references. Its table lists Welding and Equal, and the original image contains tee-shaped fittings. Actual purchase variants instead use Reducer labels, so the final order should identify the confirmed tee geometry.
Establish what corrosion protection the service needs
Corrosion-resistant wording does not identify a compatible fluid or a protection system. Describe the internal medium, contaminants, concentration and temperature, together with the external exposure. The supplier needs those conditions to assess the selected steel, any corrosion allowance and the required surface protection.
Specify whether protection concerns the internal passage, external surface or both. Where painting is required, agree preparation, coating materials, applied thickness, curing and inspection. The photographed fittings have visible surface finishes, but appearance alone cannot establish their chemistry, durability or performance in the intended environment.
Verify the equal tee and material selection
Reconcile the Reducer option with the title and table using a dimensioned drawing. Confirm run and branch nominal sizes, bores, wall dimensions and center-to-end measurements. The half-inch to 110-inch entry does not identify a particular manufactured size or establish availability throughout that range.
Carbon Steel and a234wpb are separate choices requiring selected grade, condition and traceability records. Verify the forging claim, applicable B16.9 edition, dimensional tolerances and inspection results for the offered item. Do not use generic Hexagon, mounting-hole or customized thread fields to infer the actual welded connection design.
Set operating and acceptance requirements
The High Pressure entry supplies no numerical allowable limit. Provide operating pressure, temperature, cycles and mechanical loads for the material and joint assessment. Agree weld-end preparation, relevant tests, coating checks and project acceptance documents for the selected configuration before relying on the broad performance wording.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
