Carbon Steel Equal Tee for Gas and Oil Piping
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPaintingPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
This gas and oil piping enquiry is listed as a forged carbon steel equal tee, with B16.9, A234 WPB and SCH10–SCH160 references. Its table records Equal and Welding, and the image shows tee-shaped branch fittings. The actual options nevertheless say Reducer, requiring confirmation of the item supplied.
Choose the actual tee size and wall schedule
Start with a supplier drawing that reconciles the order label and equal-tee description. Identify run and branch nominal sizes, bore dimensions, wall requirements and center-to-end geometry. Equal wording should be verified through the selected drawing, since the photograph does not measure the openings.
The broad half-inch to 110-inch option and SCH10–SCH160 title do not establish every available size and schedule combination. State the precise nominal size, schedule designation and required wall dimensions, with the applicable dimensional basis and tolerances. Agree end preparation and actual availability for that configuration.
Check gas and oil duty against the material offered
Describe the fluid composition, contaminants, pressure, temperature and operating cycles. Include mechanical loads and any project-specific exposure requirements so the selected steel and welded joint can be assessed. Gas/Oil wording alone does not establish suitability for sour fluids, hydrogen or a particular operating envelope.
The material choices are Carbon Steel and a234wpb. Confirm the actual grade and condition through traceable records, together with the claimed forging route and inspection results. Check the listed ANSI B16.9 reference and relevant edition for the offered dimensions; the generic material option is not automatically documented WPB.
Agree surface protection and acceptance checks
Painting requires a defined preparation, coating system and inspection specification where protection is needed. Dark appearance cannot identify the paint performance. High Pressure provides no numerical limit. Resolve the generic Hexagon and customized thread fields, then agree dimensional, welding, testing and project acceptance requirements for the confirmed tee.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
