316L Slip-On Flange for Water Treatment
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This water treatment listing presents a stainless steel slip-on flange with a 316L designation and DIN, ASME and API references in the title. The Stainless Steel slip-on option is selectable. Confirm the supplied grade and the applicable connection specification before assigning it to a treatment system.
Match the slip-on flange to the pipe
Provide the pipe dimensions and required flange drawing, including bore, fit, hub geometry, thickness and facing. Review the intended welding and inspection requirements under the project specification. A slip-on option does not identify a universal weld detail or installation procedure for every pipe and material combination.
Check the complete drilling pattern against the mating flange. The table lists four half-inch holes and a Polished finish. Confirm those features for the chosen size, since the shared 1/2–120 inch range does not demonstrate a single drilling arrangement or availability of every listed material and flange type.
Clarify grade and standard references
Obtain the material documentation supporting grade 316L, with the required condition and traceability. Stainless Steel is the generic selectable material; it does not independently verify the more specific title designation. Confirm the production and finish requirements rather than treating Forged or Polished wording as inspection evidence.
Identify the numbered DIN, ASME or API specification and its edition where applicable. These names do not establish mutually interchangeable dimensions, a pressure class or certification. Agree facing, bolting and allowable service requirements for the selected material and connection.
Review the treated-water environment
Describe water chemistry, chlorides, other contaminants and treatment chemicals together with temperature, pressure and operating cycles. Assess the flange and joint for those actual conditions without assuming corrosion immunity or potable-water approval. Specify material and dimensional inspections, records, marking, preservation and delivery requirements for the selected slip-on configuration.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
