A105 PN10 Carbon Steel Flange for Equipment
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This industrial equipment listing presents a carbon steel flange with DIN 2527, PN10 and A105 references and describes a Polished plate flange. Confirm the actual component drawing before combining those terms into a purchase specification. The intended plate or closure arrangement still needs to be established.
Clarify the component behind the plate wording
The selectable range includes blind and slip-on flanges as separate types, along with other designs, but has no dedicated Plate Flange choice. Ask which actual component is proposed and how the DIN 2527 reference applies to it. Do not assume the plate wording identifies a blind or slip-on configuration.
Obtain the selected drawing and applicable standard edition, including nominal size, facing, thickness and the relevant bore or closure geometry. Check the full bolt pattern against the mating equipment. Four half-inch holes are listed in the table and need verification for the specific component.
Confirm PN10 and A105 requirements
Review the PN designation under the selected specification with the actual material and temperature requirements. PN10 does not provide one allowable pressure for every operating condition. Confirm the pressure-temperature and joint acceptance basis rather than treating the title as a completed rating assessment.
Request material records supporting A105, including grade, condition and traceability. The generic Carbon Steel choice does not supply those records. Agree the intended finish beyond Polished and its inspection criteria. The shared 1/2–120 inch range does not confirm every construction, material and PN combination as available.
Agree equipment duty and purchase acceptance
Provide the fluid, contaminants, pressure, temperature, transients, cycles and loads relevant to the connection or closure. Assess the actual flange and mating joint under the equipment requirements. Confirm material and dimensional inspections, finish records, marking, preservation, quantity and delivery for the selected drawing and purchase specification.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
