DN50 Carbon Steel 90° Short-Radius Elbow | SCH80 / SCH40S Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.26 in
-
Pipe Class150SizeCustomized Size
-
Product nameElbow
This carbon-steel elbow enquiry requests a 90-degree short-radius layout with DN50, SCH80, SCH40S and ANSI B16.9 references. The Elbow variants and curved-fitting photographs support the family. Select the actual size and wall, then verify the compact elbow geometry and applicable standard requirements before accepting the intended installation.
Resolve nominal size and one actual wall designation
Map DN50 to the selected nominal pipe designation and actual outside diameter. Explain the millimetre options; a 50 mm choice is not an automatic DN50 match. Resolve whether SCH80 or SCH40S applies to the selected material and size, with measured pipe and fitting walls. Do not treat the two unassigned title labels as one wall value. Confirm equal-end dimensions and welding preparation rather than relying on the Hexagon or mounting-hole entries.
Verify the short-radius layout and dimensional standard
Request actual angle, centreline radius, centre-to-end dimensions, tangent lengths and installation envelope. Check the proposed ANSI B16.9 requirements and edition for the chosen short-radius construction; a title reference alone is not conformity evidence. The photographs cannot establish exact angle, radius or wall for every option. Select Carbon Steel with an exact material specification and traceable grade, while Stainless Steel and Alloy alternatives need separate assignments. Verify Forged through production and inspection records.
Match the elbow to its welded pipe assembly
Coordinate pipe axes, actual walls, end preparation, joining procedure and inspection access at both connections. Define Painting through surface preparation, coating specification and weld-zone condition. Supply fluid, pressure, temperature, corrosion and mechanical loads for complete-assembly assessment. Pipe Class 150 alone does not establish permissible duty. Confirm offered dimensions and availability beyond Customized Size, then accept the selected size, wall and radius drawing with its material, manufacturing, standard and joint evidence.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
