Carbon Steel Eccentric Butt Weld Reducer | A106 Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
An eccentric reducer enquiry should describe the transition between two pipe sizes and the required relationship between their centres. Begin with a drawing of the selected reducer, then connect its dimensions and material records to the intended pipeline. Clarify the scope of any material-standard reference before using it to assess the finished fitting.
Show the End Pair and Eccentric Alignment
Give the nominal sizes, outside diameters and wall thicknesses of both mating pipes. Request the reducer length and a drawing showing the required end-centre offset and alignment. One size label cannot identify the complete reducer pair. State the planned installation orientation and any flow or drainage requirement that the project needs assessed; have the selected drawing and design review establish the appropriate arrangement for that application.
Clarify the Steel Specification and Manufacturing Record
Name the exact material grade and applicable specification edition. Where A106 is referenced, identify which material or product that reference is intended to cover and define the requirements for the finished fitting separately. Obtain traceable material records and production documentation for the quoted component. If forged construction is required, include that requirement explicitly and request supporting evidence. Define the butt-weld preparation at each end against the corresponding pipe thickness and joint detail.
Establish the Transition's Documented Design Limits
Identify the dimensional and pressure-design standards governing the reducer and completed joints. Provide the fluid, operating pressure and temperature together with fabrication and installation requirements. Ask for records supporting the selected geometry, grade and duty scope. An undefined class number does not establish an operating-pressure rating, and surface appearance does not qualify a coating for service. Complete the enquiry with the approved offset drawing, end pair, walls, material-reference scope, production evidence and documented design limits.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
