BW SCH40 Carbon Steel Equal Tee | ASTM A234 WPB/A105 Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPlainPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
Clarify the material and body-construction basis of this BW SCH40 carbon steel equal-tee enquiry. Its title combines ASTM A234 WPB, ASTM A105, SMLS, welded and forged references. These terms require allocation to the delivered component; they do not establish dual material certification or a verified manufacturing route.
Separate material options from title references
The two actual variants offer Carbon Steel or a234wpb, both under a Reducer type label. A105 is title context rather than a separate material option. Confirm the governing material document and edition, full grade, condition, traceability and accepted certificates for the individual quotation.
Resolve tee versus Reducer wording and the table’s Equal entry against an approved run/branch drawing. One inspected image shows smaller-branch tees; photographs cannot certify equal geometry. Specify both nominal sizes, bores, outside diameters, center-to-end dimensions and tolerances, and clarify the Hexagon field.
Document wall, body route and weld-end preparation
The half-inch-to110-inch range label does not prove supply at every size. Confirm individual availability and actual SCH40 wall dimensions at the selected ends. Agree mating pipe wall and butt-weld preparation; a connection intended for welding does not establish whether the body is welded or seamless.
Request evidence resolving the title’s SMLS/welded wording and the table’s FORGED claim. Define customized length/height and whether generic mounting-hole or thread entries apply. Agree Plain surface requirements without inferring a protective coating or grade from the dark reference images.
Establish numerical duty before accepting the fitting
High Pressure is qualitative, with Pipe Class and Application recorded as Other. Provide medium, pressure, temperature, cycling, external loads and compatibility requirements. Obtain complete fitting/joint acceptance and agree material/manufacturing/dimensional and weld inspection, marking, documentation, quotation scope and warranty/OEM terms.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
