Forged Carbon Steel Weldolet for ASTM A105 Enquiries
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportCustomized
-
model numberMSS SP 97 ANSI B16.11 ASME B16.9TechnicForged
-
ConnectivityWeldingshapeReducing
-
head codeRoundProduct Nameweldolet sockolet threadolet nipolet flangolet
-
Size1/8"-4"StandardMSS SP 97
-
Pressure2000lbs 3000lbs 6000lbsWall thicknesssch10--sch160 xxs customized
-
ProcessforgedMaterialcarbon steel stainless stee
-
Advantagesfaster delivery time customizedPayment TermsLC TT
-
PortHebei China
A forged carbon steel branch outlet enquiry must describe the run pipe and the branch as a connected arrangement. For a weldolet request, start with the attachment to the run and the welding connection required at the branch outlet.
Define the run contour with the pipe wall
Provide the run-pipe outside diameter and wall thickness, together with the location and geometry of the branch opening. Confirm the outlet contour and attachment dimensions for that run size. One branch-size selection cannot define the run interface by itself, so include the two pipe references on the same outlet drawing rather than assuming that a single size label describes the complete fitting.
Specify the branch weld and exact outlet form
Identify the branch size, wall requirement and weld-end preparation needed for the assembly. Confirm that the supplied outlet is the intended weldolet form and that the branch connection agrees with the project drawing. Other outlet-family names describe different connection arrangements; the required welded form should therefore remain explicit throughout the request, including any dimensions needed to review access around the branch connection.
Review A105 and class requirements for that outlet
State any ASTM A105 material requirement and applicable MSS SP 97 edition for confirmation on the selected carbon steel fitting. Define the wall designation and pressure-class requirement alongside the medium and design conditions. A class label does not provide a direct working-pressure value, and a general wall range does not establish the dimensions of the proposed outlet. Request the relevant material and technical documentation for the exact run/branch combination so the forged outlet can be assessed as one specified connection.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
