Carbon Steel Equal Tee for Oil and Gas Branches
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPlainPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
This oil and gas branch-connection listing describes a forged carbon steel equal tee with welding ends. The product image supports a tee form, yet the type option reads Reducer. Confirm the final fitting configuration and its role in the pipeline before approving the order.
Define the run, branch and welding ends
Provide the run and branch nominal sizes, actual outside diameters, wall thicknesses and center-to-end dimensions. Check the intended equal configuration against the drawing. A photograph cannot verify equal measured bores or a particular schedule, and the Reducer field must be reconciled with the tee description.
Select the exact combination within the broad 1/2–110 inch option range and confirm availability. Specify bevels, bore alignment and tolerances required by the mating pipe and welding specification. The custom length, height, hole and thread labels do not establish those details or a separate threaded connection.
Review the branch design and material records
Confirm the applicable ASME B16.9 edition and dimensional acceptance for the proposed fitting. The material choices are Carbon Steel and a234wpb; obtain the actual grade, governing material specification, condition and traceability for the selected supply. FORGED wording does not replace manufacturing or inspection evidence.
Describe oil or gas composition, water and contaminants, pressure, temperature and cycles. Include relevant branch loads, supports and project joint requirements. High Pressure wording gives no allowable numerical capacity, and the application reference does not establish sour-service or hydrogen qualification.
Agree the Plain supply condition and acceptance
The table records Plain surface treatment rather than a specified coating system. Clarify the actual finish and preservation needed for transport, storage and installation. Agree required material and dimensional inspections, marking, quantity, OEM scope, warranty terms and delivery timing with the final branch fitting specification.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
