ANSI B16.9 Carbon Steel 90-Degree Butt-Weld Elbow, Forged Seamless Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty3 Yearscustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeBendhead codeHexagon
-
Overall Length1/2" - 12"Height1/2" - 12"
-
Surface TreatmentsmoothPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter1/2" - 12"
-
Pipe Featurescorrosion resistantPipe ClassNot Rated
-
ApplicationConstruction EngineeringThread TypesNPT
The ANSI B16.9 carbon steel 90-degree butt-weld elbow enquiry requires a selected bend drawing before construction pipework can be matched. Confirm the radius, wall and delivered end arrangement alongside the material and production acceptance basis.
Define the bend without assuming a radius
The sole actual variant is Elbow with Carbon Steel and a 1/2" - 12" range. Choose the exact nominal size; the range does not establish discrete available sizes. Ninety-degree naming does not establish a long or short radius.
Specify end diameters, bores, wall thickness, angle, centerline radius, center-to-end dimensions and tolerances. Repeated length, height and mounting-hole ranges cannot replace measured elbow geometry. Generic head-code wording also cannot define the full pipe-end profile.
Accept delivered ends and B16.9 compliance
Obtain the actual supplied-end drawing and joining requirements. Confirm welding preparation or the applicable thread details explicitly rather than treating different connection systems as one accepted end. Check fit-up against the mating pipe walls.
Agree the B16.9 edition, scope and dimensional evidence. The two viewed references include light-colored elbows with radius, schedule and stainless markings and a black marked elbow. These images cannot certify the supplied carbon selection's grade, size, radius, schedule or manufacturing route.
Qualify manufacture and construction conditions
Carbon Steel needs an accepted specification, grade, product form, condition and traceable inspection records. Forged and Seamless wording requires actual manufacturing evidence separately from welding installation. Smooth or corrosion-resistant wording cannot establish coating chemistry or compatibility with every medium.
Low Pressure and Not Rated provide no selected numerical operating envelope. For construction duty, identify medium composition, pressure, temperature, cycling, flow and mechanical loads. Submit the exact size/radius/wall/end drawing, material/manufacturing documents, inspection and surface requirements for acceptance of the complete pipe joint.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
