SCH40 Seamless Tee for Pipework
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPlainPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesCustomized SizePipe ClassCarbon Steel
-
ApplicationShipbuilding, Oil Field, Offshore, Water System, Natural GasThread TypesCustomized Size
Clarify the 32mm dimension before matching pipework for this ANSI B16.9 A234 WPB equal-tee enquiry. The title also references SCH40 and SMLS. These requirements need an accepted drawing and production package; dark branched reference images cannot certify delivered shape, dimensions, grade or body construction.
Define what the 32mm reference measures
State whether the title dimension is a nominal designation, measured diameter or another specified measurement. Do not assume a pipe-size conversion. Relate the chosen convention to the inch option notation and Metric table entry, then define the actual run and branch end diameters.
The two recorded choices use one 1/2-to-110-inch label with Carbon Steel or a234wpb wording. Confirm individual availability rather than treating it as continuous supply. Actual type wording says Reducer while the title says Tee, so obtain written confirmation of the delivered component before selecting connected pipe.
Document equal-end geometry and the SCH40 wall basis
Provide branch angle, center-to-end distances, actual wall/end thickness, preparation and tolerances. Identify the dimensional basis for SCH40. Resolve Equal, Hexagon and customized length, height, hole, feature and thread entries through the approved component drawing and applicable individual definitions.
Specify governing B16.9/A234 documents and editions, full material grade, condition and traceability. Confirm the intended SMLS body requirement with production and inspection records. Interpret FORGED technique separately from Welding installation attachment; neither generic material labels nor photographs certify seamless construction or conformity.
Establish service and inspection acceptance
Define Plain supplied surface condition without assuming protection. High Pressure is nonnumeric, and Carbon Steel under Pipe Class identifies material wording. State medium, pressure, temperature, cycling, loads and connected joint requirements. Listed industrial uses need relevant acceptance. Agree material/manufacturing/dimensional and joint inspection, installation, marking/traceability, confirmed size supply, OEM scope and stated one-year warranty terms.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
