6-Inch DN150 B16.5 Slip-On Flange Enquiry with Material Confirmation
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model numberflange 0364TechnicCasting
-
ConnectivityWeldingshapeReducing
-
head codeRoundOverall Length4 in
-
Height2Surface TreatmentSmooth
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.25 inPipe FeaturesFlexible, Corrosion-resistant, Chemical Resistant
-
Pipe Class150Applicationpetrochemical industry, Construction Engineering, Shipbuilding
-
Thread TypesNPT
This pipe flange page supports a six-inch DN150 slip-on enquiry with a specified B16.5 requirement. Begin by confirming the exact material and flange form for the configuration being considered. A stainless material requirement needs explicit grade confirmation before dimensions, joining details or service suitability can be accepted for the selected fitting.
Confirm material before narrowing the configuration
State the required material standard and grade clearly in the enquiry. Ask for confirmation that the selected flange meets that specification rather than identifying material from surface appearance. If the project needs stainless steel, name the exact stainless requirement and obtain confirmation for the same flange. The material decision should precede any assumption about corrosion behaviour, joining compatibility or service rating.
Check the slip-on form against actual pipe dimensions
Provide the nominal pipe size, actual outside diameter and wall thickness, together with the required flange bore and installation dimensions. Ask for a drawing confirming the selected slip-on form and the pipe-side joining arrangement. Clarify how the selected metric size relates to the six-inch DN150 request. A general flange photograph may show another form and cannot establish the required configuration.
Complete the mating and qualification details
Identify the governing B16.5 edition, facing, mating flange, bolt pattern and gasket dimensions. Define the required joining preparation and any dimensional tolerances. Include the service medium, design pressure and temperature when requesting suitability confirmation. A generic pressure-class or resistance label does not replace exact material and construction evidence. Review the selected and mating drawings together with the material specification and pressure-temperature documentation before choosing the flange for the intended pipe joint.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
