Forged Carbon Steel Weldolet for ASTM A105 Enquiries
Per l’approvvigionamento industriale
Prepara una RFQ più chiara
Includi i dati seguenti per aiutare RELIA a comprendere il componente e definire il passo successivo.
- Disegno, campione o norma di riferimento
- Grado materiale e processo preferito
- Dimensioni, tolleranze e finitura superficiale
- Applicazione, quantità obiettivo e destinazione
Tempi di produzione, imballaggio e condizioni di spedizione vengono confermati per ogni progetto dopo l’accordo su specifiche e condizioni commerciali.
-
warranty1 yearcustomized supportCustomized
-
model numberMSS SP 97 ANSI B16.11 ASME B16.9TechnicForged
-
ConnectivityWeldingshapeReducing
-
head codeRoundProduct Nameweldolet sockolet threadolet nipolet flangolet
-
Size1/8"-4"StandardMSS SP 97
-
Pressure2000lbs 3000lbs 6000lbsWall thicknesssch10--sch160 xxs customized
-
ProcessforgedMaterialcarbon steel stainless stee
-
Advantagesfaster delivery time customizedPayment TermsLC TT
-
PortHebei China
A forged carbon steel branch outlet enquiry must describe the run pipe and the branch as a connected arrangement. For a weldolet request, start with the attachment to the run and the welding connection required at the branch outlet.
Define the run contour with the pipe wall
Provide the run-pipe outside diameter and wall thickness, together with the location and geometry of the branch opening. Confirm the outlet contour and attachment dimensions for that run size. One branch-size selection cannot define the run interface by itself, so include the two pipe references on the same outlet drawing rather than assuming that a single size label describes the complete fitting.
Specify the branch weld and exact outlet form
Identify the branch size, wall requirement and weld-end preparation needed for the assembly. Confirm that the supplied outlet is the intended weldolet form and that the branch connection agrees with the project drawing. Other outlet-family names describe different connection arrangements; the required welded form should therefore remain explicit throughout the request, including any dimensions needed to review access around the branch connection.
Review A105 and class requirements for that outlet
State any ASTM A105 material requirement and applicable MSS SP 97 edition for confirmation on the selected carbon steel fitting. Define the wall designation and pressure-class requirement alongside the medium and design conditions. A class label does not provide a direct working-pressure value, and a general wall range does not establish the dimensions of the proposed outlet. Request the relevant material and technical documentation for the exact run/branch combination so the forged outlet can be assessed as one specified connection.
Informazioni tecniche per ogni richiesta prodotto
Prepara i requisiti prima della conferma finale del prodotto.
La pagina prodotto è un punto di partenza. Disegni, campioni, interfacce, materiali, quantità e accettazione vengono verificati prima di confermare stock o produzione.
Valuta questo prodotto nel contesto del tuo progetto.
Condividi disegno, campione, riferimento, quantità e applicazione. I punti non definiti possono restare aperti.
