API 6D Trunnion Mounted Ball Valve Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
applicationGeneralBall MaterialSTAINLESS STEEL
-
Connection TypeflangemediaBASE
-
Port Size1/4in - 4instructureBall
-
model numberball valveConnection Size1/4in - 4in
-
customized supportOEM, odmFlow Rate0-100L/min
-
For Maximum Pipe Size4in(10.16cm)Operating PressureLow Pressure
-
Operating Temp. Range0~150 Celsiuspowermanual
-
Sealing MaterialPTFEtemperature of mediaMedium Temperature
-
warranty1 year
A ball valve enquiry for this listing should connect the required trunnion-mounted design with an identifiable assembly. Establish the exact model before comparing seat construction, body materials or operating limits. A section drawing and model-linked records provide the basis for evaluating the proposed valve against the pipeline specification.
Resolve Seat Construction and Body Process
State whether the application requires a metal seat or a PTFE seat, and request the corresponding seal arrangement. Ask for a section drawing identifying ball support, stem, seats and body joints. Specify body, ball and sealing materials separately; a stainless-steel component label does not identify every wetted part. Obtain material records and manufacturing documentation that establish whether the selected body is forged or cast. Keep these construction decisions tied to the quoted configuration.
Match the Bore, Flanges and Manual Operator
Give the exact nominal connection size and required flow bore independently. Request flange standard, drilling, facing and face-to-face dimensions, then compare them with the mating pipeline. Include installation orientation, surrounding clearance and access for the manual operator. Confirm whether the proposed operator meets the required operating arrangement and whether the drawings show the same assembly as the quotation.
Qualify API 6D Scope and Service Conditions
Identify the required API 6D edition and conformity scope, and obtain the selected model's supporting test records. Describe the fluid composition, operating pressure and temperature together, including relevant operating changes. Ask for a qualified pressure-temperature envelope and assess flow requirements at the intended differential pressure. A broad temperature range, flow figure or qualitative pressure label does not establish this operating envelope. Complete the enquiry with the approved section drawing, interface dimensions, material requirements and documented duty limits.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
