Stainless Steel Slip-On Flange, DIN 2576 PN16 Custom-Size Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentSmoothMounting hole diameter0.26 in
-
Pipe Class150SizeCustomized Size
-
Product nameElbow
This stainless steel slip-on flange enquiry carries DIN 2576, PN16 and customized-size wording. The offered material choices also include Alloy and Carbon Steel. Confirm the actual supplied component and slip-on assembly drawing before accepting it for your installation.
Define pipe fit and flange placement before drilling
Fifteen Flange selections pair five size labels, 10 mm, 12 mm, 14 mm, 50 mm and 30 mm, with three material labels. A selection does not independently identify nominal DN, flange bore or mating pipe diameter.
For an accepted slip-on construction, specify pipe outside diameter, bore clearance and axial placement. Include flange thickness, hub requirements, outside diameter, bolt circle, hole count and hole diameter, facing and tolerances. Check the 0.26 in mounting-hole entry against the ordered drilling plan. Customized Size requires an approved drawing.
Accept the welded assembly and traceable material
Define the actual welding arrangement, pipe wall, mating preparation and inspection acceptance. Equal and Hexagon wording does not establish complete flange geometry. Obtain manufacturing records supporting the Forged requirement for the selected part.
Specify an exact stainless grade and product specification, or the required carbon steel or alloy designation, with a traceable certificate. Alloy alone does not identify its composition. Agree a measurable facing finish; Smooth does not certify sealing roughness or a coating. Photographs can support shape comparison but cannot certify slip-on construction or material.
Check DIN requirements with the full mating joint
Accept the applicable DIN 2576 edition and selected dimensions with the mating flange, gasket and fasteners. PN16 and class 150 labels do not establish automatic dimensional compatibility or equivalent pressure-temperature capacity.
State the actual medium, temperature, operating pressure and cycling for a complete joint assessment. Send accepted component identification, the pipe-fit and drilling drawing, material certificate, facing requirements, welding and forging inspection criteria, governing rating basis and full operating duty.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
