Stainless Steel 304/316L Forged Pipe Fittings, DIN15 Butt-Weld Equal/Reducer Tee Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.19in
-
Pipe Class150SizeCustomized Size
-
Product nameElbow
This stainless steel 304/316L forged pipe-fitting enquiry names DIN15, butt-welded construction and equal/reducer tee arrangements. Select the required component and its complete drawing before assigning a branch ratio, bend geometry or operating capability.
Select an actual fitting combination
Thirty actual variants combine Elbow or TEE with 10 mm, 12 mm, 14 mm, 50 mm or 30 mm and Stainless Steel, Alloy or Carbon Steel. Keep the selected combination explicit. Millimeter labels do not establish whether a measurement represents nominal size, outside diameter or bore.
Clarify the intended meaning of DIN15 and the applicable dimensional document. For a tee, define run and branch sizes and the equal or reducing arrangement. For an elbow, specify angle and radius. Each selected drawing needs end diameters, bores, wall thickness, overall dimensions and tolerances.
Accept material and joining details
Stainless Steel is one material choice, while Alloy and Carbon Steel are separate choices. The 304/316L naming requires an accepted grade and traceable material records; it cannot assign a stainless grade to every variant or establish equivalence between grades.
Both viewed photographs show dark tee references, including a WPB-marked fitting. These references cannot certify the selected material, branch ratio, finish or manufacturing route. Confirm actual welding preparation and mating-pipe fit from the supplied drawing. Hexagon naming and the mounting-hole entry do not define a complete pipe-end profile.
Set fabrication and Class 150 acceptance
Forged and Painting descriptions require actual manufacturing and coating specifications, inspection criteria and delivery-condition evidence. A painted appearance alone does not establish coating chemistry, corrosion resistance or compatibility with the intended medium.
Class 150 is a designation rather than one fixed operating pressure. Agree the applicable component standard and material-dependent pressure-temperature basis, then provide medium composition, cycling, flow and external loads. Submit the chosen type/size/material, full end and branch or bend drawing, material/manufacturing records and service conditions for complete-joint acceptance.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
