Seamless Butt-Weld Class 150 Painted Carbon Steel Pipe Cap Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
TechnicOtherConnectivityWelding
-
shapeRoundhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class150
This seamless butt-weld Class 150 painted carbon-steel cap enquiry needs evidence for the required manufacturing construction. Specify the delivered component before ordering. Seamless naming and reference markings do not independently establish a certified production route, exact grade or numerical operating capability.
Link the manufacturing requirement to inspection records
Request the actual production route, applicable conformity requirements and inspection evidence identifying the supplied cap. Other process wording is not proof of seamless manufacture. Butt-weld/Welding describes attachment and cannot independently establish how the cap body was produced.
The two actual Cap/Carbon Steel choices carry 10 mm and 12 mm labels. Define their nominal or measured roles and connected pipe dimensions. Specify exact material designation, grade, condition and traceability, plus required wall/end thickness. No schedule or exact grade should be assumed from these labels.
Approve the complete closure and welding interface
Reference views show a dark interior cup with markings and red-toned cup/domed forms. They cannot certify production, material, size or thickness. Include profile, depth, outside/inside end dimensions, body/end thickness, roundness and tolerances on the accepted drawing.
Resolve Round/Hexagon wording through actual geometry. The separate 0.25-inch mounting-hole value cannot define bore or establish a required opening; approve any opening explicitly. Specify weld preparation and joint inspection against actual connected pipe material, dimensions and wall, with relevant installation criteria.
Set the supplied coating and operating basis
Define surface preparation, coating system, internal/external coverage, functional/weld-end exclusions and measurable finish acceptance. Different colors cannot establish equivalent coatings or corrosion performance. Class 150 needs governing material-temperature records. State medium, pressure, temperature, cycling, loads and closure-specific duty; agree inspection, marking/traceability, actual availability and applicable quotation terms.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
