MSS SP-95 A694 F65 Swaged Pipe Nipple with Concentric Requirement Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 Yearcustomized supportOEM, ODM
-
model numbernipple 6201TechnicCasting
-
ConnectivityFemale/MaleshapeReducing
-
head codeRoundOverall Length4 in
-
Height2Surface TreatmentPainting
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.2 inPipe FeaturesFlexible, Corrosion-resistant, Chemical Resistant
-
Pipe Class150Applicationpetrochemical industry, Shipbuilding, Construction Engineering
-
Thread TypesNPT
This swaged pipe nipple page supports an enquiry with MSS SP-95 and A694 F65 requirements for a reducing pipe transition. Define the large and small ends separately before choosing the configuration. Any concentric alignment or manufacturing condition required by the project needs confirmation for the same nipple whose dimensions are being reviewed.
Describe the full reducing end pair
Give the nominal size, actual outside diameter and wall thickness at the large end and the small end. State the required overall length and show the pipe centerlines on a drawing. A single selectable size does not describe both connections or establish the complete reducing pair. Confirm how the selected option relates to the dimensions needed for the piping transition.
Assign the connection form at each end
Identify whether each end needs a thread or a defined preparation for another joining method. State any thread designation explicitly, with the relevant dimensions for the mating pipe or fitting. A general female/male label cannot establish both end interfaces. Review the connection arrangement together with the length and alignment so that the selected nipple can be checked against the installation drawing.
Confirm the F65 and SP-95 requirements
Request the exact material specification and confirmation that the A694 F65 requirement applies to the selected configuration. Clarify the required manufacturing construction and applicable MSS SP-95 scope separately. Stainless Steel and Carbon Steel choices need grade-specific assessment and should not inherit an unverified common qualification. Include the service medium, design pressure and temperature, then obtain the material, construction and pressure-temperature evidence needed before accepting the nipple for service.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
