A105 Class 2500 Socket Weld Flange for Power Plants
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This power generation listing describes a steel socket weld flange with A105 and Class 2500 references. It also names ANSI, JIS and DIN and uses High Pressure wording. Confirm the actual material, selected specification and operating requirements before accepting the proposed size and class combination.
Check the socket and pipe requirements
The Carbon Steel socket weld option is selectable. Provide the pipe dimensions and required flange drawing, including socket bore, depth and fit, facing, thickness and complete drilling pattern. Agree welding and inspection requirements under the project specification rather than assuming a universal socket gap or installation procedure.
Verify the four half-inch bolt holes listed in the table against the mating component for the selected design. The shared 1/2–120 inch range does not confirm every socket weld size, material and class combination as available. Obtain written confirmation for the exact configuration being considered.
Establish Class 2500 and standard applicability
Class 2500 is a class designation, not one allowable pressure for all temperatures or materials. High Pressure wording does not supply the required operating envelope. Confirm the actual pressure-temperature and joint requirements for the selected material and the applicable component design.
Choose the numbered ANSI, JIS or DIN specification and its edition where applicable. The combined names do not establish interchangeable socket geometry, facing or drilling. Request material records supporting A105, with condition, traceability and the required production inspections; Forged wording alone is not a supplied inspection package.
Review the power-system duty
State the fluid, temperature, pressure, transients, cycles and loads affecting the connection. Assess the socket weld flange under the plant requirements and selected standard scope. Clarify the finish beyond Polished, then agree material, socket and dimensional inspection records, marking, preservation, quantity and delivery for the actual component.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
