A105 Carbon Steel Threaded Flange for Piping
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This industrial piping listing offers a carbon steel threaded flange and includes A105, GOST 12820, ISO and ANSI references in its title. The Carbon Steel threaded option is selectable. Confirm the actual thread specification and the applicability of each cited standard to the component being ordered.
Specify the threaded connection precisely
Provide the mating pipe thread requirements, including the standard, form, nominal size, pitch or taper and inspection criteria as applicable. No particular thread system is identified in the listing. Obtain a dimensioned drawing instead of assuming a common pipe thread, universal engagement or one sealing procedure.
Check facing, thickness, bore and the complete bolt pattern against the mating connection. Four half-inch bolt holes appear in the table and title, but need confirmation for the chosen size. The shared 1/2–120 inch range does not establish every threaded flange arrangement or material combination as available.
Resolve standard scope and material evidence
Ask the supplier to demonstrate whether the GOST 12820 reference applies to the selected threaded construction, using the applicable edition, scope and drawing. The combined GOST, ISO and ANSI wording should not be accepted as proof of compliance, common dimensions or interchangeability.
Identify the actual numbered specifications needed for the project. Request material documentation supporting the A105 designation, including condition and traceability, because the generic Carbon Steel option does not provide those records. Agree the intended Polished finish and how its relevant surfaces will be inspected.
Confirm piping duty and acceptance records
Describe the fluid, contaminants, pressure, temperature, operating cycles and loads affecting the threaded joint. No pressure class or allowable service envelope is supplied here. Review the selected material and connection under the project requirements, then confirm material, thread and dimensional inspection records, marking, preservation, quantity and delivery timing.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
