Carbon Steel Welded Tee for Oil and Water
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPlainPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesCustomized SizePipe ClassCarbon Steel
-
ApplicationShipbuilding, Oil Field, Offshore, Water System, Natural GasThread TypesCustomized Size
Specify the branch connection needed for this carbon-steel ASME B16.9 tee enquiry. Straight/Reducing and the half-inch title reference require confirmation against the actual supplied fitting. The branched reference image helps discuss configuration; photographic proportions cannot establish size, grade, production or performance.
Define the required run and branch combination
For the requested straight or reducing arrangement, list each run and branch end diameter, branch angle, center-to-end lengths, wall/end thickness, preparation and tolerances. Resolve Equal and Hexagon table wording through an approved drawing of the component being quoted.
Two recorded choices share one 1/2-to-110-inch label with Carbon Steel or a234wpb material wording. Obtain confirmation of individual half-inch supply rather than assuming every size in that label is available. Clarify nominal versus measured dimensions and Metric notation. Customized length, height, holes, features and thread entries need individual definitions where applicable.
Document the body route and joining requirements
Identify the B16.9 document, edition and relevant component requirements. Specify full material designation, grade, condition and traceability; generic Carbon Steel and a234wpb choices do not themselves certify conformity.
Describe the body manufacturing route separately from Welding installation attachment. FORGED and welded references need accepted production and inspection evidence before interpreting body construction. Agree Plain surface condition, end preparation and supplied tolerances without inferring corrosion resistance.
Supply an oil or water operating basis
High Pressure is not a numerical rating; Carbon Steel under Pipe Class provides material wording. State medium, pressure, temperature, cycling, external loads and connected pipe/joint conditions. Listed shipbuilding, oil-field, offshore and natural-gas contexts also need application acceptance. Establish material/manufacturing/dimensional and joint inspection, installation, marking, confirmed size availability, OEM scope and applicable one-year warranty terms.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
