DN200 / DN150 Carbon Steel MS / Alloy Seamless Butt-Weld End Cap Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.17 in
-
Pipe Class150SizeCustomized Size
-
Product nameElbow
This seamless butt-weld end-cap enquiry references DN200, DN150 and carbon steel/MS/alloy. Actual Cap variants use millimetre labels and broad material choices rather than explicit DN200 or DN150 selections. Confirm how the title sizes relate to the offered variant before defining the pipe closure or assuming a supplied size range.
Map the nominal request to a cap section drawing
Ask for the selected nominal-size convention and actual pipe-end diameter; nominal DN is not automatically a measured end diameter. Record the cap's depth, closure profile, edge wall and body wall requirements with the adjoining pipe data. The photographs show dark domed exterior and interior examples without qualifying actual size, material or manufacture. Equal, Hexagon and the mounting-hole field do not define the cap profile or an intended hole through the closure.
Clarify MS and one exact material requirement
Select Carbon Steel for the carbon/MS enquiry and establish the intended MS designation, exact grade, specification and edition with traceability. Alloy and Stainless Steel choices need separate exact materials. No schedule is assigned by the page, so define required thickness and tolerance at the cap body and weld edge through the drawing. Customized Size alone does not establish supplied dimensions or capacity.
Document seamless manufacture and the closure weld separately
Request production evidence for Seamless independently from butt-weld joining. The Forged entry also needs production records; it is not automatically incompatible with a seamless body description. Confirm edge preparation, wall alignment and joining inspection with the mating pipe, along with coating and joint-zone condition beyond Painting. Establish the dimensional requirements and Pipe Class 150's material/temperature basis. Assess fluid, pressure, temperature, corrosion and closure loads across the cap, adjoining pipe and completed weld before acceptance.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
