ASME B16.9 WPB Carbon Steel Reducing Butt-Welding Tee Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM
-
model numbertee 6701TechnicCasting
-
ConnectivityMale/FemaleshapeEqual/Reducing
-
head codeHexagon/RoundSurface TreatmentPainting
-
Mounting hole diameter0.25 inPipe Class125
A reducing tee selection begins with the pipe routing and the three interfaces that must be joined. This enquiry retains the listing's WPB carbon-steel, butt-welding and ASME B16.9 requirements. Its mixed material choices and generic size labels need model-specific documentation before they establish an offered reducing configuration or its qualification.
Describe the branch layout before selecting an option
Show the two run connections and the branch on a sketch, with nominal size, outside diameter and wall thickness at each end. Explain the dimensional basis of the millimetre choices and identify the actual combination being offered. Confirm equal or reducing construction from that end map. Give centre-to-end dimensions, branch orientation and available space around the joining locations. Photographed tee forms do not establish those measurements for every option. The Male/Female, head-code and mounting-hole labels also cannot define the required weld preparation.
Link the chosen material to production evidence
For a WPB requirement, select carbon steel and request the full material specification and grade traceability. If a stainless-steel variant is proposed, agree a separate material grade and specification. Establish which ASME B16.9 edition and dimensional and inspection criteria apply to the selected item. Manufacturing records should reconcile the process wording before seamless or forged construction is accepted. Appearance alone cannot resolve that decision. State the coating preparation, coverage and condition required around the weld ends, since Painting does not describe a complete coating system.
Set acceptance for three joined interfaces
Review the run and branch connections together with the mating-pipe specifications and actual fluid, pressure, temperature and corrosion conditions. A Pipe Class 125 label is not a documented allowable-duty limit. Agree the joining and inspection requirements, then connect acceptance to one consistent drawing and matching material, manufacturing and inspection records.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
