B16.9 Butt-Weld Concentric Reducer for 2-Inch Enquiries
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model numberreducer 3697TechnicForged
-
ConnectivityFemaleshapeEqual
-
head codeHexagonOverall Length4 in
-
Height4Surface TreatmentPainting
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.2 inPipe FeaturesFlexible
-
Pipe Class125Applicationpetrochemical industry, Power Industry, Construction Engineering, Shipbuilding, Heating Systems
-
Thread TypesNPT
A two-inch concentric reducer enquiry should identify which end carries the named pipe size. Define the other end and the required centerline relationship before confirming a material, wall or construction requirement for the proposed transition.
Complete the size pair behind the two-inch request
State the nominal designation and actual dimensions of the large and small ends, with units included. Identify whether the two-inch requirement applies to the larger or smaller pipe interface. A single size label does not describe the full transition, so the two ends should appear together on the reducer drawing. Confirm the required concentric alignment and the transition length for that same dimensional pair.
Specify the butt-weld geometry at both ends
Provide the wall thickness and end preparation needed at each mating pipe. Confirm the actual connection form rather than treating a female or thread descriptor as equivalent to butt-weld preparation. The reducer profile should be reviewed with the two pipe interfaces and available layout space. Reference images of different transition profiles can help communicate the family, but cannot establish the alignment or dimensions of the requested part.
Confirm B16.9 and construction with the selected steel
Choose Stainless Steel or Carbon Steel and name the required grade explicitly. State the applicable B16.9 edition and any seamless-construction requirement for confirmation on the proposed reducer. Include the medium and design conditions when requesting material, construction and rating documentation for that configuration. The final transition enquiry should connect the complete end pair, concentric alignment, wall and material specification before dimensional fit or service suitability is accepted.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
