ASME B16.9 A234 Carbon Steel 90-Degree Elbow, SCH 40/STD Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty3 Yearscustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeBendhead codeHexagon
-
Overall Length1/2" - 12"Height1/2" - 12"
-
Surface TreatmentsmoothPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter1/2" - 12"
-
Pipe Featurescorrosion resistantPipe ClassNot Rated
-
ApplicationConstruction EngineeringThread TypesNPT
This ASME B16.9 A234 carbon steel elbow enquiry includes 90-degree and SCH 40/STD wording. Start with the selected size and measured wall thickness rather than assuming the two wall designations are universally interchangeable.
Accept the wall requirement at the ordered size
SCH 40 and STD wording does not create separate actual wall variants or establish measured thickness. Agree exact nominal size or outside-diameter basis, required wall and applicable dimensional drawing. The sole actual Elbow / 1/2-inch to 12-inch / Carbon Steel selection remains one range, not a list of discrete available sizes.
Define measured 90-degree angle, bend radius, center-to-end dimensions, end diameters, bores, wall thicknesses and tolerances. Repeating the range under length, height and mounting-hole diameter does not provide those measurements. Bend and Hexagon wording does not replace the full elbow drawing.
Confirm the joint ends and exact A234 material
Obtain accepted joining-end construction. A welded request needs selected preparation, compatible pipe wall, procedure and inspection; any threaded request needs its own size, form, engagement and mating-part acceptance. Do not assume a combined connection from general labels.
Agree the selected ASME B16.9 edition, applicable scope and compliance evidence. A234 alone does not establish WPB or another exact grade. Request the selected product specification, grade, heat-traceable material certificate and production inspections. A forged requirement needs actual manufacturing evidence. Reference photos cannot certify schedule, measured angle/radius, grade or body route.
Assess finish and operating conditions together
Smooth and corrosion-resistant wording does not identify coating chemistry or qualify the actual medium. Define finish/coating and exposure criteria against the intended service. Construction naming supplies enquiry context rather than fluid approval.
Low Pressure and Not Rated provide no numerical pressure-temperature envelope. Submit fluid composition, temperature, pressure and cycling alongside accepted size/wall, actual ends, complete measured geometry, material and production evidence and standard requirements. The operating assessment must cover the elbow, mating pipe and complete installed joint.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
