ASME B16.20 Spiral Wound Gasket Assembly Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
Thickness1 mm, 0.3~5.0mmTypeSpiral Wound Gasket, Inner Ring
-
model number002Shaperound
-
Materialss,csPackingCarton
-
Size1/2"--60"DELIVERY TIME10-15 Days
-
COLOURcustomizedCertificateISO9001
-
AdvantageCompetitive-price
An ASME B16.20 spiral-wound gasket enquiry should first define what is included in the requested assembly. Confirm whether the requirement covers a complete gasket or a ring component before selecting dimensions and assigning materials to the sealing construction.
Identify the gasket assembly and included rings
Describe the required winding and filler, together with any inner and outer rings that belong to the assembly. Name each component on a gasket drawing or component schedule. A carbon or stainless selection by itself does not identify every part of a spiral-wound build, and an inner-ring requirement should not be treated as proof that the complete gasket is included in the supply scope.
Assign thickness to the correct gasket component
Provide the gasket inner diameter, outer diameter and required thickness, with units and the relevant drawing references. Clarify which component each thickness requirement describes. Identify the mating flange standard, nominal size, pressure class and facing so the complete gasket dimensions can be reviewed against the joint. A broad size or thickness range does not establish the exact arrangement needed for a particular flange face.
Confirm the B16.20 requirement for the chosen build
State the applicable standard edition and request confirmation of the construction and dimensions for the same gasket assembly. Provide the medium and design conditions so the winding and filler compatibility can be assessed together with the ring arrangement. Identify any inspection or documentation requirement for that build. The final spiral-wound gasket enquiry should connect component scope, assigned materials and flange-fit dimensions before the proposed assembly is accepted for the intended service.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
