B16.9 A234 WPB SCH40 Steel Pipe Tee Enquiry
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
warranty1 yearscustomized supportOEM
-
model number1/2"TechnicForged
-
ConnectivityWeldingshapeReducing
-
head codeHexagonSurface TreatmentPainting
-
Mounting hole diameter0.17 inPipe Class150
-
Body materialCarbon SteelPackingWooden Case
-
Surface treatmentBlack PaintingTypeButt Welded
-
Size1/2"-48"CertificationGs
A pipe tee enquiry with B16.9, A234 WPB and SCH40 requirements should connect those references to a selected three-port fitting. Confirm the branch arrangement and dimensional specification before evaluating material or conformity records. The useful evidence is a drawing and supporting documentation that describe the same proposed tee.
Resolve the Branch Arrangement and Size Mapping
State whether the branch should match the run size or reduce to another size, then specify both run connections and the branch. Give the nominal sizes, mating pipe outside diameters and wall requirements for all three interfaces. Where the project calls for a 32 mm fitting, clarify the size convention and obtain a selected-model dimensional map. A half-inch model label or broad size range does not resolve the complete tee configuration.
Document WPB Material and SCH40 Construction
Identify the exact material specification and WPB requirement and request traceable records for the quoted tee. Define the schedule convention and obtain the actual wall mapping for each connection. Specify the manufacturing route, including seamless construction if required, and obtain production evidence. Identify the required butt-weld preparation and applicable B16.9 edition, with the dimensional and conformity records needed by the project.
Confirm Design and Certification Evidence
Provide the fluid, operating pressure and temperature together with joint and fabrication requirements. Ask for the documented design basis covering the selected material, geometry and completed joints. Any required certification should identify the scheme, scope and supporting record; an abbreviation alone does not establish certification. Complete the enquiry with the approved branch drawing, size and wall mapping, material and production records, conformity scope and qualified service limits.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
