ANSI/ASME B16.5 DN150 A106 Carbon Steel CNC-Machined Blind Flange
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
Surface TreatmentCNC MachinedApplicationConstruction
-
Bolt Hole Diameter1/2"~24"Bolt Hole Quantity6
This ANSI/ASME B16.5 DN150 carbon steel blind flange enquiry requires acceptance of the supplied flange material and product form. Treat A106 naming as a specification question to verify with documents before approving the closure or its operating duty.
Confirm the applicable flange material scope
Obtain the governing material document, edition, applicable product scope, grade, condition and traceable inspection evidence. A named designation alone cannot qualify the supplied blind flange. Confirm the accepted specification without substituting another grade automatically.
Carbon Steel and Stainless Steel are separate actual alternatives. Neither establishes a specific grade by itself. CNC-machined appearance also cannot establish material condition, heat treatment, dimensional tolerances or corrosion performance.
Define DN150 closure and exact interface
Twelve actual variants offer six constructions within one 1/2"~24" range. Agree the DN150 nominal-size correspondence and chosen blind drawing. The range is not a discrete inventory list, and weld-neck, slip-on, socket-weld, lap-joint or threaded alternatives do not establish the requested solid closure.
Check closure thickness, outside diameter, facing type and finish, gasket contact dimensions, bolt circle, hole quantity/diameter and tolerances. The repeated Bolt Hole Diameter range and quantity 6 cannot define selected drilling. Two viewed open-bore references, including one with JIS markings, cannot certify B16.5 DN150 blind geometry or A106 material acceptance.
Accept the selected class and construction duty
Agree the B16.5 edition, scope and chosen class with compliance evidence. Pressure-style title wording does not establish a numerical operating limit or discrete class variant. Assess the material-dependent pressure-temperature envelope with the complete mating gasket and fasteners.
For construction use, provide actual medium composition, pressure, temperature, cycling and closure loads. Submit accepted material/product-form documentation, the nominal-size and blind/interface drawing, standard/class evidence, surface requirements and assembly details together. These establish the basis for evaluating installed compatibility and service conditions.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
