Three-Piece Forged Trunnion Ball Valve Enquiry with Rating Confirmation
工业采购项目
准备更清晰的 RFQ
请提供以下信息，帮助 RELIA 理解零件要求并与您确认下一步。
- 图纸、样品或参考标准
- 材料牌号和首选工艺
- 尺寸、公差和表面处理
- 应用、目标数量和目的地
生产周期、包装和运输条款将在规格与贸易条件确认后按项目确定。
-
applicationGeneralBall MaterialCarbon Steel
-
Connection TypeflangemediaBASE
-
Port Size1/4in - 4instructureControl
-
model numberball valveConnection Size1/4in - 4in
-
customized supportOEM, odmFlow Rate0-100L/min
-
For Maximum Pipe Size4inOperating PressureLow Pressure
-
Operating Temp. Range0~150 Celsius(0~270℉)powermanual
-
Sealing MaterialPTFEtemperature of mediaMedium Temperature
-
warranty1 year
This trunnion ball valve enquiry includes three-piece body and forged-construction requirements with the actual rating scope to be confirmed. Identify the selected model and request its assembly information before evaluating the operating duty. Body arrangement, internal support and material specifications need to be established for the same proposed valve.
Request the body assembly and internal support drawing
Ask for documentation showing the actual body-section arrangement and ball support. Confirm the required three-piece and trunnion configuration directly instead of inferring it from external bolts or a handwheel. Define the manual operating duty and actuation arrangement alongside the assembly requirements. A general valve photograph does not establish the internal construction or demonstrate a maintenance or service advantage.
Define material and pressure-designation scope
Specify the body, ball and seat materials separately and request the required construction records. A casting label does not identify an exact body grade or prove how the selected component was manufactured. State the governing standard and required pressure designation, then ask for the corresponding pressure-temperature documentation. Confirm temperature limits with consistent units and a clearly identified material and model scope.
Check the complete valve against the piping duty
Provide the flange, port and face-to-face dimensions required by the installation. Compare the selected drawing with the mating pipework and the operating arrangement. Include the intended medium, design pressure and temperature so that qualification can be reviewed for the actual configuration. Neither a broad pressure label nor a size range establishes rated-service suitability. Before accepting the valve, confirm the assembly, support, materials and interface together with the documented operating envelope, keeping every requirement tied to the selected model.
每个产品询价都需要的技术信息
在最终确认产品前先整理需求。
产品页只是起点。在确认库存匹配或定制生产前，我们会评审图纸、样品、接口、材料、数量及验收要求。
结合您的项目场景讨论该产品。
提供现有图纸、样品、参考件、目标数量及应用信息。尚不确定的项目可留待评审。
