PN16 Carbon Steel Weld Neck Flange for Oil and Gas
Per l’approvvigionamento industriale
Prepara una RFQ più chiara
Includi i dati seguenti per aiutare RELIA a comprendere il componente e definire il passo successivo.
- Disegno, campione o norma di riferimento
- Grado materiale e processo preferito
- Dimensioni, tolleranze e finitura superficiale
- Applicazione, quantità obiettivo e destinazione
Tempi di produzione, imballaggio e condizioni di spedizione vengono confermati per ogni progetto dopo l’accordo su specifiche e condizioni commerciali.
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This oil and gas piping listing describes a PN16 carbon steel weld neck flange with an EN 1092-1 reference. The actual catalog contains a Carbon Steel and Weld Neck Flange combination alongside other options. Confirm the selected standard, size and material before defining the mating joint.
Specify the EN flange and welding geometry
Identify the applicable EN 1092-1 edition, flange type, nominal size, facing and requirements for the chosen design. Match the neck, hub, bore, wall and bevel to the adjoining pipe and welding specification. The broad inch-size option does not establish a complete nominal-diameter mapping or measured end dimensions.
Confirm the exact combination within the shared 1/2–120 inch range and its availability. Check flange thickness, bolt circle, hole count and diameter on the approved drawing. Four half-inch holes appear in the table, but that pattern should not be extended to every size, material and type in the catalog.
Verify material and PN16 acceptance
Request the actual carbon steel grade, condition, chemistry and traceability, with production and inspection records required by the purchase specification. The generic material option does not establish a particular grade or certified EN conformity. Other selectable flange materials and types should not replace the selected weld neck configuration without review.
PN16 is a title designation rather than a universal allowable pressure at every temperature. Confirm the applicable pressure-temperature requirements for the actual material and design. State the oil or gas composition, water and contaminants, cycles and loads needed for the joint assessment.
Agree finish and pipeline supply requirements
Clarify the numerical finish or other surface requirements beyond Polished. The wording does not establish corrosion performance or sour-service or hydrogen qualification. Review the flange, weld, gasket and bolting requirements for the project, then confirm dimensional inspection, marking, preservation, quantity, material documents and delivery timing.
Informazioni tecniche per ogni richiesta prodotto
Prepara i requisiti prima della conferma finale del prodotto.
La pagina prodotto è un punto di partenza. Disegni, campioni, interfacce, materiali, quantità e accettazione vengono verificati prima di confermare stock o produzione.
Valuta questo prodotto nel contesto del tuo progetto.
Condividi disegno, campione, riferimento, quantità e applicazione. I punti non definiti possono restare aperti.
