2" RF B16.5 Class 150 A105 Socket-Weld Carbon Steel Flange, Forged CNC Machined
Per l’approvvigionamento industriale
Prepara una RFQ più chiara
Includi i dati seguenti per aiutare RELIA a comprendere il componente e definire il passo successivo.
- Disegno, campione o norma di riferimento
- Grado materiale e processo preferito
- Dimensioni, tolleranze e finitura superficiale
- Applicazione, quantità obiettivo e destinazione
Tempi di produzione, imballaggio e condizioni di spedizione vengono confermati per ogni progetto dopo l’accordo su specifiche e condizioni commerciali.
-
Surface TreatmentCNC MachinedApplicationConstruction
-
Bolt Hole Diameter1/2"~24"Bolt Hole Quantity6
A 2-inch RF B16.5 Class 150 A105 socket-weld carbon steel flange is the requested configuration for this construction enquiry. Confirm those particulars on the accepted delivery drawing before treating the forged, CNC-machined naming as an approved component specification.
Confirm the requested size and raised face
The actual size selection is a 1/2"~24" range rather than a discrete 2-inch choice. RF and Class 150 are title references, so obtain the selected facing and class explicitly. Agree the applicable B16.5 edition and type/size/class scope alongside the exact nominal size.
Carbon Steel and Stainless Steel each have Blind, Weld Neck, Slip On, Socket Weld, Lap Joint and Threaded Flange choices. Select one supplied type/material combination. For socket weld, require the accepted socket and bore dimensions with mating-pipe and installation requirements; another listed type cannot establish the same end arrangement.
Accept material and drilling evidence
A105 identifies the named carbon-material basis without certifying the stainless alternative. Obtain the accepted specification, grade, product form, condition and traceable inspection records, with evidence supporting the actual forging and machining route.
Verify outside diameter, thickness, raised-face dimensions/finish, bolt circle, hole count, hole diameters and tolerances. The six-hole table entry and broad bolt-hole diameter range cannot certify this requested drawing. The viewed open-bore flanges and dark-finished pair cannot establish delivered size, socket detail, A105 material, coating or drilling.
Evaluate the complete Class 150 joint
Construction wording does not supply an operating envelope. Class 150 requires the applicable material-temperature basis rather than one fixed pressure, and surface appearance does not prove finish compliance.
Submit actual medium, pressure, temperature, cycling and mechanical loads. Review compatible gasket, fasteners, mating flange and assembly requirements together with the selected end/drilling drawing and material package before accepting the complete joint.
Informazioni tecniche per ogni richiesta prodotto
Prepara i requisiti prima della conferma finale del prodotto.
La pagina prodotto è un punto di partenza. Disegni, campioni, interfacce, materiali, quantità e accettazione vengono verificati prima di confermare stock o produzione.
Valuta questo prodotto nel contesto del tuo progetto.
Condividi disegno, campione, riferimento, quantità e applicazione. I punti non definiti possono restare aperti.
