Carbon Steel Long and Short Radius Butt-Weld Elbow Enquiries
Para compras industriales
Prepare una RFQ más clara
Incluya estos datos para que RELIA comprenda la pieza y pueda acordar el siguiente paso.
- Plano, muestra o norma de referencia
- Calidad del material y proceso preferido
- Dimensiones, tolerancias y acabado superficial
- Aplicación, cantidad objetivo y destino
Los plazos de producción, el embalaje y el envío se confirman para cada proyecto tras acordar especificaciones y condiciones comerciales.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model number2TechnicForged
-
ConnectivityWeldingshapeCustomized
-
head codeHexagonOverall Length4 in
-
Height4Surface TreatmentPainting
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.25 inPipe FeaturesUv Resistant, Chemical Resistant, Corrosion-resistant, Flexible, underground rated
-
Pipe ClassNot RatedApplicationpetrochemical industry, Shipbuilding, Construction Engineering
-
Thread TypesNPTSizeCustomized Size
-
Product nameElbow
A long- or short-radius butt-weld elbow request should start with the space available for the turn. Confirm the measured geometry needed by the pipe layout before selecting a carbon steel, stainless steel or alloy configuration for the elbow.
Define the radius through the pipe route envelope
Provide the centerline radius, turn angle and positions of both elbow ends on the layout drawing. Identify surrounding equipment or pipework that restricts the turning envelope. A long-radius and a short-radius requirement should be requested distinctly, with the actual dimensions confirmed for the chosen size. The labels alone do not establish the space occupied by a particular elbow or its fit between the adjoining runs.
Check the butt-weld arrangement at both ends
Give the pipe-end dimensions, wall thickness and required welding preparation for each connection. Confirm the intended end forms and identify any thread requirement separately rather than assuming one general connection label applies throughout. Keep the end positions and preparation with the radius drawing, so the proposed elbow can be reviewed as one routing component. A nominal-size choice does not establish the complete mating-end geometry by itself.
Request the rating for the chosen material and wall
Name the required steel grade and construction requirement within the selected material family. Provide the medium and design pressure and temperature when requesting the applicable service rating and documentation. An unrated class descriptor supplies no working-pressure value, and a resistance label does not replace compatibility review for the proposed grade. The final radius-specific elbow request should connect measured route geometry, both weld interfaces and material requirements before the part is accepted for service.
Información técnica para cada consulta
Prepare los requisitos antes de confirmar el producto.
La página es el punto de partida. Planos, muestras, interfaces, materiales, cantidades y criterios de aceptación se revisan antes de confirmar stock o fabricación.
Comente este producto en el contexto de su proyecto.
Comparta plano, muestra, referencia, cantidad y aplicación. Los puntos desconocidos pueden quedar abiertos para revisión.
