Sanitary 304 Stainless 90° Elbow Enquiry, Mirror Finish Handrail Fitting

• warranty

  1 years
  customized support

  ODM, OEM
• model number

  TEE
  Technic

  Casting
• Connectivity

  Welding
  shape

  Equal
• head code

  Round
  Overall Length

  1/8"-6"
• Height

  1/8"-6"
  Surface Treatment

  Painting
• Pressure

  Low Pressure
  System of Measurement

  inch
• Mounting hole diameter

  1/8"-6"
  Pipe Features

  Flexible
• Pipe Class

  150
  Application

  building water supply and drainage, fire protection systems, natural gas pipeline installation, natural gas & petroleum industry, natural gas transportation, water supply and drainage systems
• Thread Types

  NPT OR BSPT

This stainless pipe fitting enquiry presents sanitary 304, a 90-degree elbow and external mirror polishing for handrail use. Confirm the actual supplied subtype before ordering. The sole selectable combination is Elbow / 19MM / Stainless Steel; a selected construction drawing must establish the delivered component.

Develop the selected 19MM construction drawing

Clarify whether 19MM denotes tube outside diameter, nominal size or another dimension. For elbow supply, define angle, centreline radius, end diameters, walls, centre-to-end dimensions and tolerances. For a branch-fitting request, identify run and branch dimensions and orientation. Obtain explicit acceptance of the required construction.

The inch ranges under length, height and mounting-hole labels do not define the selected geometry. Curved open examples, including one with printed markings, illustrate photographs rather than certifying the chosen grade, standard, dimension or casting route. The Flexible label does not establish movement or load capacity.

Locate the finish and confirm supplied connections

Specify the supplied ends on the accepted drawing. Welded supply needs preparation, matching pipe wall and joining inspection; a threaded selection needs one exact NPT or BSPT form with size, gender, engagement, gauging and sealing acceptance. Confirm the delivered configuration before joint design.

Obtain the exact stainless product specification, selected grade, traceable certificate and matching identification. Define separate surface locations and acceptance for mirror polishing and painting, including preparation and coating requirements. Casting needs production evidence. Sanitary wording does not replace documented cleanability, measured finish or application approval.

Separate handrail loads from piping duty

A handrail request needs support geometry, actual loads and surface acceptance. For piping, establish the governing standard, medium composition and certified pressure-temperature basis; Low Pressure and class wording provide no universal operating limit. Water, fire and gas names are not independent approvals. Enquire with actual subtype, size basis, end drawing, grade certificate, manufacturing/finish acceptance and the applicable structural or fluid duty.