Carbon Steel SCH40 Seamless Tee

• warranty

  1 Year
  customized support

  OEM
• Technic

  FORGED
  Connectivity

  Welding
• shape

  Equal
  head code

  Hexagon
• Overall Length

  Customized Size
  Height

  Customized Size
• Surface Treatment

  Plain
  Pressure

  High Pressure
• System of Measurement

  Metric
  Mounting hole diameter

  Customized Size
• Pipe Features

  Customized Size
  Pipe Class

  Carbon Steel
• Application

  Shipbuilding, Oil Field, Offshore, Water System, Natural Gas
  Thread Types

  Customized Size

Define the dimensions and governing specification for this carbon-steel seamless SCH40 equal-tee enquiry. The title references JIS B2220, a unit-free 6 and 180mm without naming the measured feature. Confirm their intended meanings before treating them as an accepted pipe size or component drawing.

Map each title dimension to the supplied branch fitting

Record actual run and branch end diameters, branch angle, center-to-end distances, overall height/length, wall/end thickness, preparation and tolerances. Identify what the 6 and 180mm references describe, including nominal versus measured conventions and the Metric table entry.

The actual type option says Reducer while the title says Equal Tee. Photographic proportions cannot resolve the supplied configuration. Obtain written identity and drawing confirmation. Two recorded material choices use Carbon Steel or a234wpb with one 1/2-to-110-inch label; confirm individual availability instead of assuming continuous supply.

Confirm the document allocation and SCH40 wall basis

Establish how the JIS B2220 reference applies to the requested component and specify complete governing documents, parts and editions. Agree the SCH40 dimensional basis and actual wall values. Resolve Equal, Hexagon and customized hole, feature and thread entries through relevant drawing definitions.

Specify full material designation, grade, condition and traceability. Obtain records supporting the intended seamless body and manufacturing route. Interpret FORGED technique separately from Welding installation attachment. Generic material choices and dark reference images do not certify production, standard conformity or protective surface performance.

Accept the joint against actual operating conditions

Define Plain supplied condition and inspection. High Pressure is nonnumeric; Carbon Steel under Pipe Class is material wording. Supply medium, pressure, temperature, cycling, loads and connected joint requirements. Listed industrial applications need relevant acceptance. Agree material/manufacturing/dimensional and joint inspection, installation, marking/traceability, confirmed supply sizes, OEM deliverables and stated one-year warranty terms.