Industrial Pipe Valve Enquiry with Gate or Ball Configuration Confirmation
للتوريد الصناعي
جهّز RFQ أكثر وضوحًا
أدرج المعلومات التالية كي تفهم RELIA القطعة وتناقش معك الخطوة التالية.
- رسم أو عينة أو معيار مرجعي
- درجة المادة والعملية المفضلة
- الأبعاد والتفاوتات وتشطيب السطح
- الاستخدام والكمية والوجهة
يتم تأكيد مدة الإنتاج والتعبئة وشروط الشحن لكل مشروع بعد الاتفاق على المواصفات والشروط التجارية.
-
applicationGeneralBall MaterialCarbon Steel
-
Connection TypeflangemediaBASE
-
Port Size1/4in - 4instructureControl
-
model numberball valveConnection Size1/4in - 4in
-
customized supportOEM, odmFlow Rate0-100L/min
-
For Maximum Pipe Size4in(10.16cm)Operating PressureLow Pressure
-
Operating Temp. Range0~150 Celsiuspowermanual
-
Sealing MaterialPTFEtemperature of mediaMedium Temperature
-
warranty1 year
This industrial pipe valve enquiry requires confirmation of the closure mechanism, material scope and operating conditions for the selected configuration. Identify whether the project requires a gate or ball valve and describe the intended duty. The valve family provides a starting point; the actual mechanism and selected model determine which specification should be assessed.
Establish the closure mechanism and duty
State whether the valve is intended for isolation or flow regulation, and request the corresponding mechanism and model documentation. Confirm how the valve is operated and which actuation arrangement the project needs. A handwheel or external body photograph does not establish the internal closure type or its operating performance. Keep the required function linked to the selected valve rather than accepting a general flow-control description as sufficient.
Define materials and the piping interface
Specify the body, closure and sealing materials separately. A material label for a ball does not establish the pressure-containing body material, and a casting label does not name an exact composition. Request the actual port dimensions, connection type and standard, and face-to-face length. Compare the selected connection drawing with the adjoining pipework. The size choice should be tied to this drawing so it is clear which interface and opening are being evaluated.
Request the operating envelope for the named medium
Provide the intended medium, design pressure, temperature and operating mode. Ask for the selected valve's pressure-temperature and relevant shut-off or regulating documentation. Low Pressure and Medium Pressure labels are qualitative choices, not numeric operating ratings. General flow or temperature ranges also need a defined configuration and test scope before use in a service decision. Complete the enquiry by confirming the mechanism, material, interface and operating limits together, then assess the selected valve against the actual piping duty.
معلومات فنية لكل استفسار عن منتج
جهّز المتطلبات قبل التأكيد النهائي للمنتج.
صفحة المنتج هي نقطة البداية. تتم مراجعة الرسوم والعينات والواجهات والمواد والكميات ومتطلبات القبول قبل تأكيد المخزون أو الإنتاج المخصص.
ناقش هذا المنتج في سياق مشروعك.
شارك الرسم والعينة والمرجع والكمية ومعلومات التطبيق. يمكن ترك البنود غير المعروفة مفتوحة للمراجعة.
