Forged Carbon Steel Flanged Top-Entry Ball Valve Enquiry
للتوريد الصناعي
جهّز RFQ أكثر وضوحًا
أدرج المعلومات التالية كي تفهم RELIA القطعة وتناقش معك الخطوة التالية.
- رسم أو عينة أو معيار مرجعي
- درجة المادة والعملية المفضلة
- الأبعاد والتفاوتات وتشطيب السطح
- الاستخدام والكمية والوجهة
يتم تأكيد مدة الإنتاج والتعبئة وشروط الشحن لكل مشروع بعد الاتفاق على المواصفات والشروط التجارية.
-
applicationGeneralConnection Typeflange
-
mediaBASEPort Size1/4in - 4in
-
structureControlmodel numberball valve
-
Connection Size1/4in - 4incustomized supportOEM, odm
-
Flow Rate0-100L/minFor Maximum Pipe Size4in(10.16cm)
-
Operating PressureLow PressureOperating Temp. Range0~150 Celsius
-
powermanualSealing MaterialPTFE
-
temperature of mediaMedium Temperaturewarranty1 year
A flanged top-entry ball-valve enquiry needs an identified model, a defined body specification and evidence of the requested internal arrangement. Use the carbon-steel and forged-construction requirements to describe the valve you need, then confirm the selected assembly against its own drawings. The information below helps organize that technical enquiry without assigning an unverified configuration to a particular size or option.
Establish the Top-Entry Assembly
Request a section drawing that identifies the valve mechanism and an assembly drawing that shows the proposed top-entry arrangement. Confirm which components can be accessed through that arrangement and the space needed around the installed valve. If ball-valve construction is essential to the application, have it identified on the selected-model documentation rather than relying on the external appearance alone.
Define Body Construction and Flange Fit
State the exact carbon-steel grade required for the body and obtain the corresponding material records. Identify the manufacturing process separately so that a forged-body requirement is clear. Body, ball and sealing components should each have their own specification. Match the flange facing, drilling, port and face-to-face dimensions to the mating pipeline drawing. Confirm the size designation and interface together before choosing an option.
Build the Operating Requirement
Name the process medium and describe its service temperatures and pressure conditions. Request the pressure-temperature envelope and seat or seal compatibility for the same assembly shown on the drawing. Include the intended manual operation and any installation access constraints. A complete enquiry links the model identifier, top-entry construction, body grade, dimensional drawing and operating evidence. That allows the proposed valve to be assessed against a single set of project requirements before the final configuration is selected.
معلومات فنية لكل استفسار عن منتج
جهّز المتطلبات قبل التأكيد النهائي للمنتج.
صفحة المنتج هي نقطة البداية. تتم مراجعة الرسوم والعينات والواجهات والمواد والكميات ومتطلبات القبول قبل تأكيد المخزون أو الإنتاج المخصص.
ناقش هذا المنتج في سياق مشروعك.
شارك الرسم والعينة والمرجع والكمية ومعلومات التطبيق. يمكن ترك البنود غير المعروفة مفتوحة للمراجعة.
