A234 WPB SCH40 Carbon Steel Reducer | Concentric / Eccentric Enquiry
للتوريد الصناعي
جهّز RFQ أكثر وضوحًا
أدرج المعلومات التالية كي تفهم RELIA القطعة وتناقش معك الخطوة التالية.
- رسم أو عينة أو معيار مرجعي
- درجة المادة والعملية المفضلة
- الأبعاد والتفاوتات وتشطيب السطح
- الاستخدام والكمية والوجهة
يتم تأكيد مدة الإنتاج والتعبئة وشروط الشحن لكل مشروع بعد الاتفاق على المواصفات والشروط التجارية.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.19in
-
Pipe Class150SizeCustomized Size
-
Product nameElbow
This A234 WPB carbon-steel SCH40 reducer enquiry lists concentric and eccentric construction references with a half-inch to 72-inch title range. Reducer variants and the tapered-fitting photograph establish the family. Resolve the Equal body entry and select actual two-end dimensions before accepting geometry or offered size combinations.
Specify both ends and the centreline relationship
Identify larger and smaller end nominal sizes, outside diameters, actual walls, overall length and transition profile. Select concentric or eccentric geometry on a dimensioned drawing. For an eccentric requirement, define offset and installation orientation against the pipe layout. Resolve Equal against the reducing requirement rather than assuming a selected end relationship. Explain which end the single millimetre option denotes and provide the other size separately. The photograph cannot qualify exact offset, ratio or dimensions across all variants.
Confirm wall mapping, material and offered combinations
Map SCH40 to both ends under the chosen dimensional system with measured fitting and adjoining pipe walls. Select Carbon Steel for the A234 WPB requirement and obtain specification, edition and traceable grade records; Stainless Steel and Alloy alternatives need separate assignments. Agree the numbered dimensional fitting standard, which is absent from the title. Verify Forged through production and inspection evidence. Confirm actual offered combinations and availability beyond the title range and Customized Size.
Qualify the complete welded transition
Reconcile the imported Elbow name and generic Hexagon or mounting-hole entries against the selected reducer drawing. Match both welding-end preparations to the mating pipes and agree alignment, joining procedure and inspection access. Define Painting through coating type and weld-zone condition. Provide fluid, pressure, temperature, corrosion and mechanical loads for full transition-assembly assessment; Pipe Class 150 alone does not establish allowable duty. Base acceptance on the selected geometry, traceable material/manufacturing and welded-joint evidence.
معلومات فنية لكل استفسار عن منتج
جهّز المتطلبات قبل التأكيد النهائي للمنتج.
صفحة المنتج هي نقطة البداية. تتم مراجعة الرسوم والعينات والواجهات والمواد والكميات ومتطلبات القبول قبل تأكيد المخزون أو الإنتاج المخصص.
ناقش هذا المنتج في سياق مشروعك.
شارك الرسم والعينة والمرجع والكمية ومعلومات التطبيق. يمكن ترك البنود غير المعروفة مفتوحة للمراجعة.
