Carbon Steel Pipe Elbow | 45, 90 and 180 Degree Enquiry
للتوريد الصناعي
جهّز RFQ أكثر وضوحًا
أدرج المعلومات التالية كي تفهم RELIA القطعة وتناقش معك الخطوة التالية.
- رسم أو عينة أو معيار مرجعي
- درجة المادة والعملية المفضلة
- الأبعاد والتفاوتات وتشطيب السطح
- الاستخدام والكمية والوجهة
يتم تأكيد مدة الإنتاج والتعبئة وشروط الشحن لكل مشروع بعد الاتفاق على المواصفات والشروط التجارية.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.2 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
A steel pipe elbow enquiry begins with the required direction change and the route available for the pipeline. Select the angle and bend geometry before comparing material or manufacturing requirements. If the project needs a return arrangement, identify exactly how the proposed components form that arrangement so the complete assembly can be reviewed.
Choose the Angle and Identify Every Component
State whether the design requires a 45-, 90- or 180-degree direction change, then request a drawing of the selected proposal. Specify the bend radius and relevant end-to-centre dimensions. For a return requirement, establish whether the proposal consists of one component or joined components; identify every joint and include it in the fabrication review. The presence of several angle terms in an enquiry does not define a model for each angle.
Fit the End Geometry to the Planned Pipe Route
Provide the nominal size, mating outside diameter and wall thickness at both ends. Define weld preparation and compare the proposed geometry with available clearance, pipe alignment and support requirements. Name the exact steel grade and requested manufacturing route. Where seamless construction is required, obtain production documentation for the selected component rather than relying on surface appearance. Any coating or special mounting requirement should also be identified on the drawing and specification.
Review the Duty of the Complete Bend Arrangement
Identify the governing dimensional and pressure-design standards and state the fluid, operating pressure and temperature. Include relevant operating changes and the joint requirements that apply to the assembly. Request material, manufacturing and design records covering the proposed configuration. An isolated class number cannot establish the pressure capability of the fitting or its joints. Complete the enquiry with the angle, radius, component arrangement, end dimensions and qualified service scope so the intended direction change can be assessed as a complete pipeline detail.
معلومات فنية لكل استفسار عن منتج
جهّز المتطلبات قبل التأكيد النهائي للمنتج.
صفحة المنتج هي نقطة البداية. تتم مراجعة الرسوم والعينات والواجهات والمواد والكميات ومتطلبات القبول قبل تأكيد المخزون أو الإنتاج المخصص.
ناقش هذا المنتج في سياق مشروعك.
شارك الرسم والعينة والمرجع والكمية ومعلومات التطبيق. يمكن ترك البنود غير المعروفة مفتوحة للمراجعة.
