90° Stainless Steel Pipe Fitting Elbow Enquiry
Voor industriële inkoop
Bereid een duidelijke RFQ voor
Neem onderstaande gegevens op zodat RELIA het onderdeel begrijpt en de volgende stap kan bespreken.
- Tekening, monster of referentienorm
- Materiaalkwaliteit en voorkeursproces
- Maten, toleranties en oppervlakteafwerking
- Toepassing, doelvolume en bestemming
Productietijd, verpakking en verzendvoorwaarden worden per project bevestigd nadat specificaties en handelsvoorwaarden zijn overeengekomen.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class125SizeCustomized Size
-
Product nameElbow
This stainless elbow enquiry requests a ninety-degree change of pipe direction. The actual variants identify Elbow with broad material and millimetre size choices, but do not assign a bend radius, exact grade or wall. Use a selected drawing to define how the bend will fit your two adjoining pipes.
Check radius and clearance around the direction change
Confirm the requested angle with its tolerance, centreline radius and centre-to-end dimensions. Record the orientation and available installation space before selecting the bend. The photographs show several silver curved examples without establishing actual dimensions or material. Do not classify the selected elbow as short-radius or long-radius from those images; that choice needs the documented geometry.
Translate the size choice into both end measurements
Explain the nominal-size convention behind the millimetre menu labels, then verify each outside diameter and wall with the mating pipe data. Confirm what Equal means for the selected drawing. Hexagon, the mounting-hole value and Customized Size do not provide complete bend dimensions or a supplied capacity range. Establish the applicable dimensional requirement and wall designation; no schedule is stated here.
Define the stainless material and actual welded joint
Choose one exact stainless grade with complete specifications and traceability; the page does not identify 304 or 316. Alloy and Carbon Steel alternatives need their own material and joining assessment. Define Welding through the actual end detail, preparation, alignment and inspection requirements, without assuming a particular weld-end design. Verify Forged through production records and clarify Painting and joint-zone condition. Establish Pipe Class 125's standard, unit and material/temperature basis, then evaluate fluid, pressure, temperature, corrosion and mechanical loads across the bend and both completed joints.
Technische informatie voor elke productaanvraag
Bereid de eis voor vóór de definitieve productbevestiging.
De productpagina is het startpunt. Tekeningen, monsters, interfaces, materialen, aantallen en acceptatie-eisen worden beoordeeld vóór voorraadmatch of maatwerkproductie.
Bespreek dit product binnen uw project.
Deel tekening, monster, referentie, doelaantal en toepassing. Onbekende punten kunnen openblijven voor beoordeling.
