Carbon Steel Long and Short Radius Butt-Weld Elbow Enquiries
Voor industriële inkoop
Bereid een duidelijke RFQ voor
Neem onderstaande gegevens op zodat RELIA het onderdeel begrijpt en de volgende stap kan bespreken.
- Tekening, monster of referentienorm
- Materiaalkwaliteit en voorkeursproces
- Maten, toleranties en oppervlakteafwerking
- Toepassing, doelvolume en bestemming
Productietijd, verpakking en verzendvoorwaarden worden per project bevestigd nadat specificaties en handelsvoorwaarden zijn overeengekomen.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model number2TechnicForged
-
ConnectivityWeldingshapeCustomized
-
head codeHexagonOverall Length4 in
-
Height4Surface TreatmentPainting
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.25 inPipe FeaturesUv Resistant, Chemical Resistant, Corrosion-resistant, Flexible, underground rated
-
Pipe ClassNot RatedApplicationpetrochemical industry, Shipbuilding, Construction Engineering
-
Thread TypesNPTSizeCustomized Size
-
Product nameElbow
A long- or short-radius butt-weld elbow request should start with the space available for the turn. Confirm the measured geometry needed by the pipe layout before selecting a carbon steel, stainless steel or alloy configuration for the elbow.
Define the radius through the pipe route envelope
Provide the centerline radius, turn angle and positions of both elbow ends on the layout drawing. Identify surrounding equipment or pipework that restricts the turning envelope. A long-radius and a short-radius requirement should be requested distinctly, with the actual dimensions confirmed for the chosen size. The labels alone do not establish the space occupied by a particular elbow or its fit between the adjoining runs.
Check the butt-weld arrangement at both ends
Give the pipe-end dimensions, wall thickness and required welding preparation for each connection. Confirm the intended end forms and identify any thread requirement separately rather than assuming one general connection label applies throughout. Keep the end positions and preparation with the radius drawing, so the proposed elbow can be reviewed as one routing component. A nominal-size choice does not establish the complete mating-end geometry by itself.
Request the rating for the chosen material and wall
Name the required steel grade and construction requirement within the selected material family. Provide the medium and design pressure and temperature when requesting the applicable service rating and documentation. An unrated class descriptor supplies no working-pressure value, and a resistance label does not replace compatibility review for the proposed grade. The final radius-specific elbow request should connect measured route geometry, both weld interfaces and material requirements before the part is accepted for service.
Technische informatie voor elke productaanvraag
Bereid de eis voor vóór de definitieve productbevestiging.
De productpagina is het startpunt. Tekeningen, monsters, interfaces, materialen, aantallen en acceptatie-eisen worden beoordeeld vóór voorraadmatch of maatwerkproductie.
Bespreek dit product binnen uw project.
Deel tekening, monster, referentie, doelaantal en toepassing. Onbekende punten kunnen openblijven voor beoordeling.
