PN16 Carbon Steel Weld Neck Flange for Oil and Gas
Voor industriële inkoop
Bereid een duidelijke RFQ voor
Neem onderstaande gegevens op zodat RELIA het onderdeel begrijpt en de volgende stap kan bespreken.
- Tekening, monster of referentienorm
- Materiaalkwaliteit en voorkeursproces
- Maten, toleranties en oppervlakteafwerking
- Toepassing, doelvolume en bestemming
Productietijd, verpakking en verzendvoorwaarden worden per project bevestigd nadat specificaties en handelsvoorwaarden zijn overeengekomen.
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This oil and gas piping listing describes a PN16 carbon steel weld neck flange with an EN 1092-1 reference. The actual catalog contains a Carbon Steel and Weld Neck Flange combination alongside other options. Confirm the selected standard, size and material before defining the mating joint.
Specify the EN flange and welding geometry
Identify the applicable EN 1092-1 edition, flange type, nominal size, facing and requirements for the chosen design. Match the neck, hub, bore, wall and bevel to the adjoining pipe and welding specification. The broad inch-size option does not establish a complete nominal-diameter mapping or measured end dimensions.
Confirm the exact combination within the shared 1/2–120 inch range and its availability. Check flange thickness, bolt circle, hole count and diameter on the approved drawing. Four half-inch holes appear in the table, but that pattern should not be extended to every size, material and type in the catalog.
Verify material and PN16 acceptance
Request the actual carbon steel grade, condition, chemistry and traceability, with production and inspection records required by the purchase specification. The generic material option does not establish a particular grade or certified EN conformity. Other selectable flange materials and types should not replace the selected weld neck configuration without review.
PN16 is a title designation rather than a universal allowable pressure at every temperature. Confirm the applicable pressure-temperature requirements for the actual material and design. State the oil or gas composition, water and contaminants, cycles and loads needed for the joint assessment.
Agree finish and pipeline supply requirements
Clarify the numerical finish or other surface requirements beyond Polished. The wording does not establish corrosion performance or sour-service or hydrogen qualification. Review the flange, weld, gasket and bolting requirements for the project, then confirm dimensional inspection, marking, preservation, quantity, material documents and delivery timing.
Technische informatie voor elke productaanvraag
Bereid de eis voor vóór de definitieve productbevestiging.
De productpagina is het startpunt. Tekeningen, monsters, interfaces, materialen, aantallen en acceptatie-eisen worden beoordeeld vóór voorraadmatch of maatwerkproductie.
Bespreek dit product binnen uw project.
Deel tekening, monster, referentie, doelaantal en toepassing. Onbekende punten kunnen openblijven voor beoordeling.
