Carbon Steel Eccentric Butt Weld Reducer | A106 Enquiry
Voor industriële inkoop
Bereid een duidelijke RFQ voor
Neem onderstaande gegevens op zodat RELIA het onderdeel begrijpt en de volgende stap kan bespreken.
- Tekening, monster of referentienorm
- Materiaalkwaliteit en voorkeursproces
- Maten, toleranties en oppervlakteafwerking
- Toepassing, doelvolume en bestemming
Productietijd, verpakking en verzendvoorwaarden worden per project bevestigd nadat specificaties en handelsvoorwaarden zijn overeengekomen.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
An eccentric reducer enquiry should describe the transition between two pipe sizes and the required relationship between their centres. Begin with a drawing of the selected reducer, then connect its dimensions and material records to the intended pipeline. Clarify the scope of any material-standard reference before using it to assess the finished fitting.
Show the End Pair and Eccentric Alignment
Give the nominal sizes, outside diameters and wall thicknesses of both mating pipes. Request the reducer length and a drawing showing the required end-centre offset and alignment. One size label cannot identify the complete reducer pair. State the planned installation orientation and any flow or drainage requirement that the project needs assessed; have the selected drawing and design review establish the appropriate arrangement for that application.
Clarify the Steel Specification and Manufacturing Record
Name the exact material grade and applicable specification edition. Where A106 is referenced, identify which material or product that reference is intended to cover and define the requirements for the finished fitting separately. Obtain traceable material records and production documentation for the quoted component. If forged construction is required, include that requirement explicitly and request supporting evidence. Define the butt-weld preparation at each end against the corresponding pipe thickness and joint detail.
Establish the Transition's Documented Design Limits
Identify the dimensional and pressure-design standards governing the reducer and completed joints. Provide the fluid, operating pressure and temperature together with fabrication and installation requirements. Ask for records supporting the selected geometry, grade and duty scope. An undefined class number does not establish an operating-pressure rating, and surface appearance does not qualify a coating for service. Complete the enquiry with the approved offset drawing, end pair, walls, material-reference scope, production evidence and documented design limits.
Technische informatie voor elke productaanvraag
Bereid de eis voor vóór de definitieve productbevestiging.
De productpagina is het startpunt. Tekeningen, monsters, interfaces, materialen, aantallen en acceptatie-eisen worden beoordeeld vóór voorraadmatch of maatwerkproductie.
Bespreek dit product binnen uw project.
Deel tekening, monster, referentie, doelaantal en toepassing. Onbekende punten kunnen openblijven voor beoordeling.
