ASTM A234 WP5 DN125 7D Carbon Steel Pipe Bend Enquiry
Voor industriële inkoop
Bereid een duidelijke RFQ voor
Neem onderstaande gegevens op zodat RELIA het onderdeel begrijpt en de volgende stap kan bespreken.
- Tekening, monster of referentienorm
- Materiaalkwaliteit en voorkeursproces
- Maten, toleranties en oppervlakteafwerking
- Toepassing, doelvolume en bestemming
Productietijd, verpakking en verzendvoorwaarden worden per project bevestigd nadat specificaties en handelsvoorwaarden zijn overeengekomen.
-
warranty1 yearcustomized supportOEM, ODM
-
model numberbend 3079TechnicCasting
-
ConnectivityMale/FemaleshapeEqual/Reducing
-
head codeHexagon/RoundSurface TreatmentPainting
-
Mounting hole diameter0.26 inPipe Class150
This ASTM A234 WP5 DN125 7D pipe-bend enquiry is associated with model bend 3079. Agree a material specification and dimensioned drawing before ordering. Title references do not independently certify grade, nominal-size availability, radius convention or numerical service capability.
Resolve material and DN125 selection first
Ten actual Bend variants combine each 10 mm, 12 mm, 14 mm, 50 mm and 30 mm label with Stainless Steel or Carbon Steel. Define the chosen label's nominal or measured meaning and its relationship to DN125. Do not assume these choices prove equivalent dimensions or availability of the title size.
Specify exact material designation, grade, condition, governing document and edition, with traceable inspection records. Assign WP5 requirements to the intended supplied component. Neither the carbon-steel title nor the two material alternatives establish that every selection meets that named specification.
Turn the 7D reference into an approved drawing
Define the radius convention and reference diameter explicitly. Include bend angle, centerline radius, tangent lengths, outside diameters, wall thickness, end preparation and required tolerances. The photographs show curved forms with different end appearances; they cannot establish a measured radius ratio, angle, grade or internal construction.
Choose the actual Equal/Reducing inlet/outlet arrangement. Tie Male/Female and Hexagon/Round wording to accepted end geometry rather than assuming a thread or socket configuration. The separate 0.26-inch mounting-hole entry cannot define the bore or complete attachment dimensions.
Agree manufacturing evidence and installed duty
Clarify the supplied manufacturing route and relevant conformity/inspection evidence for the Casting reference. Define painting preparation, coverage and end-surface exclusions. Class 150 requires its governing material-temperature basis. Provide medium, pressure, temperature, cycling, loads and connected pipe dimensions; agree joint acceptance, installation, marking/traceability, OEM/ODM work and stated one-year warranty terms.
Technische informatie voor elke productaanvraag
Bereid de eis voor vóór de definitieve productbevestiging.
De productpagina is het startpunt. Tekeningen, monsters, interfaces, materialen, aantallen en acceptatie-eisen worden beoordeeld vóór voorraadmatch of maatwerkproductie.
Bespreek dit product binnen uw project.
Deel tekening, monster, referentie, doelaantal en toepassing. Onbekende punten kunnen openblijven voor beoordeling.
