Steel Pipe Elbow for Construction and Oil

• warranty

  3 Years
  customized support

  OEM
• Technic

  FORGED
  Connectivity

  Welding
• shape

  Bend
  head code

  Hexagon
• Overall Length

  1/2" - 12"
  Height

  1/2" - 12"
• Surface Treatment

  smooth
  Pressure

  Low Pressure
• System of Measurement

  INCH
  Mounting hole diameter

  1/2" - 12"
• Pipe Features

  corrosion resistant
  Pipe Class

  Not Rated
• Application

  Construction Engineering
  Thread Types

  NPT

This steel elbow listing is directed toward construction and oil piping enquiries with an ASME B16.9 reference. The title describes stainless steel 304 and butt-weld ends, while the selectable material is Carbon Steel and NPT appears in the table. Confirm the supplied configuration before agreeing purchase acceptance.

Connect the material package with the order

Obtain the actual grade, condition and traceability documentation to resolve the stainless designation against the carbon steel option. Establish the material specification and applicable edition. The order should use one supported material basis rather than adopting whichever description appears in a particular listing field.

Request the production inspections and conformity evidence needed for the actual component, including records supporting FORGED. Define the required finish and any surface treatment beyond smooth and corrosion resistant wording. These descriptions do not demonstrate a measured finish or verified corrosion performance for the supplied elbow.

Review B16.9 scope and the end drawing

Confirm the selected ASME B16.9 edition and component scope with the actual drawing. Resolve butt-weld and NPT descriptions using the end details and mating-pipe requirements. Specify the preparation or thread inspections that apply instead of treating both references as a verified connection arrangement.

No angle or radius is provided. Define nominal size, outside diameter, wall, bend dimensions and center-to-end requirements on the drawing. Repeated 1/2–12 inch ranges under length, height and mounting-hole diameter are not measurements, and Hexagon wording does not complete the actual component geometry.

State the construction or oil-system duty

Describe the selected fluid, composition, contaminants, pressure, temperature, cycles, transients and loads. Low Pressure and Not Rated leave numerical allowable limits unestablished. Confirm material, dimensional, end and surface records, marking, preservation, availability and delivery, while agreeing OEM requests and warranty terms separately from service acceptance.