90 Degree Carbon Steel SCH80 B16.9 Pipe Elbow Enquiry
Voor industriële inkoop
Bereid een duidelijke RFQ voor
Neem onderstaande gegevens op zodat RELIA het onderdeel begrijpt en de volgende stap kan bespreken.
- Tekening, monster of referentienorm
- Materiaalkwaliteit en voorkeursproces
- Maten, toleranties en oppervlakteafwerking
- Toepassing, doelvolume en bestemming
Productietijd, verpakking en verzendvoorwaarden worden per project bevestigd nadat specificaties en handelsvoorwaarden zijn overeengekomen.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
A 90-degree pipe elbow enquiry should establish the required change in pipe direction together with the dimensions of the selected fitting. Confirm the exact nominal size and its relationship to the mating pipe before evaluating wall schedule or material requirements. Keep the drawing, material records and quotation linked to one elbow configuration.
Establish the Bend and Installation Geometry
Specify the required elbow angle and bend radius, then request centre-to-end dimensions and end geometry. Compare the drawing with the available installation space and the alignment of both pipe sections. Where the project calls for a three-quarter-inch fitting, confirm the nominal-size convention and corresponding pipe outside diameter rather than assuming an equivalence with a millimetre option. These dimensions establish whether the proposed elbow can be incorporated into the planned pipe route.
Define SCH80 Walls and the Steel Specification
State the schedule convention and obtain the actual wall thickness for the selected nominal size and exact steel grade. Include the required material designation and weld-end preparation at both connections. If seamless construction is part of the specification, request production evidence identifying the manufacturing route of the quoted item. Define any surface-treatment requirement separately; the visible surface does not establish steel grade, fabrication history or coating performance.
Verify the B16.9 and Operating Design Scope
Identify the applicable B16.9 edition and the conformity evidence required for the selected elbow. Describe the fluid, operating pressure and temperature, and provide the joint and fabrication requirements for the completed line. A wall-schedule label or isolated class number cannot replace a documented pressure-design basis. Use the final dimensional drawing, material and manufacturing records, joint detail and qualified service limits to complete the elbow review before deciding whether it meets the intended application.
Technische informatie voor elke productaanvraag
Bereid de eis voor vóór de definitieve productbevestiging.
De productpagina is het startpunt. Tekeningen, monsters, interfaces, materialen, aantallen en acceptatie-eisen worden beoordeeld vóór voorraadmatch of maatwerkproductie.
Bespreek dit product binnen uw project.
Deel tekening, monster, referentie, doelaantal en toepassing. Onbekende punten kunnen openblijven voor beoordeling.
