Carbon Steel Cast Welded Elbow for High-Pressure Enquiry

• warranty

  3 Years
  customized support

  OEM, odm
• Technic

  CASTING
  Connectivity

  Welding
• shape

  Equal
  head code

  Hexagon
• Overall Length

  1/4-4 inch
  Height

  1/4-4 inch
• Surface Treatment

  black
  Pressure

  High Pressure
• System of Measurement

  Metric
  Mounting hole diameter

  22mm-42mm
• Pipe Features

  Corrosion resistant, high pressure resistant
  Pipe Class

  Not Rated
• Application

  Other
  Thread Types

  NO

This carbon steel elbow enquiry presents casting, welding, black surface and corrosion-resistant wording for a requested high-pressure application. Six actual choices pair diameter and thickness: 22mm/3mm, 25mm/3mm, 32mm/3mm, 42mm/4mm, 48mm/5mm and 60mm/5mm. Accept the exact bend geometry and documented duty for the chosen pair.

Turn the paired metric choice into a complete elbow drawing

Confirm whether the quoted diameter means outside diameter, bore or another basis. Establish tolerances, bend angle, radius, center-to-end dimensions and required wall through the bend. The paired metric wording does not independently identify a nominal DN, NPS or pipe schedule.

Generic length and height ranges and the mounting-hole label cannot replace a selected drawing. Open-ended bent examples in the photographs support visual enquiry but do not certify an angle, radius, selected diameter/thickness combination, carbon steel grade or manufacturing route. Obtain matching supplied-product identification.

Define actual welded ends and the black surface

The table identifies welding and no thread type. Confirm actual weld preparation, mating pipe-wall compatibility and joining inspection for both ends. Request the exact carbon steel material specification, grade, heat-traceable certificate and accepted manufacturing and inspection records for cast supply.

Black describes appearance without identifying coating chemistry, film thickness or a corrosion allowance. Set the required surface acceptance and protection system for the actual exposure. Corrosion-resistant wording alone does not establish compatibility with the proposed medium, cleaning process or external environment.

Document pressure acceptance for the installed bend

A high-pressure enquiry still needs a certified pressure-temperature basis; the retained Not Rated label supplies no operating limit. Assess actual medium composition, temperature, pressure cycles and the complete welded joint under an accepted governing specification. Send the exact diameter/thickness choice, angle and radius, end drawing, grade and manufacturing documents, surface requirements, full duty and inspection criteria before installation acceptance.