Name: A105 Socket Weld Flange | B16.5 and Class 150 Enquiry
SKU: 191284014191284006191284229
Price: 1.50 USD
Availability: InStock

Surface Treatment

Polished

model number

DN15-DN1200
Application

Agricultural Irrigation, Air Conditioning, Chemical Industry, Construction, Environmental Engineering, Fiber Optic Co MMunication, Food And Beverage

Bolt Hole Diameter

11 mm
Bolt Hole Quantity

4

Product name

All Kinds of Flanges/carbon Steel Flanges/sorf/wnrf/blind Flanges
Material

A105

Standard

ASTM
pass

ISO9001:2008

packing

wooden case or pallets
loading port

Tianjin xingang port

shipment

by sea
payment terms

T/T or L/C

delivery time

5-60days
Certificate

ISO9001

An A105 socket-weld flange enquiry should connect the pipe connection detail to the required flanged joint. Identify the selected socket-weld model and individual size before comparing material or class references. The proposal needs a drawing and supporting records that describe the same component, its mating pipe and its sealing interface.

Define the Socket and Pipe Fit on One Drawing

Request the socket geometry, bore and relevant pipe-interface dimensions together with the flange's nominal size. Give the mating pipe outside diameter and wall thickness and identify the joint preparation and fabrication requirements. For a two-inch project requirement, confirm the dimensional mapping to the selected model rather than relying on a broad range label. Verify the proposed connection against the installation arrangement and keep the socket construction distinct from alternative flange types.

Document A105 Material and the B16.5 Interface

Specify the applicable A105 material requirements and obtain traceable material and production records. Include forged construction explicitly where the project requires it. State the B16.5 edition and Class 150 requirement, then request facing, outside diameter, thickness, bolt circle and drilling dimensions. If a raised face is required, identify the relevant facing and sealing details. Compare these dimensions with the complete mating flange and joint specification.

Qualify the Selected Assembly's Duty and Evidence

Provide the fluid, operating pressure and temperature and obtain the material-dependent pressure-temperature basis for the selected flange. Include fabrication and joint requirements in the review. Any sector-specific acceptance or certification requirement should have current, relevant, scope-matched records; an ISO label or application list alone does not qualify product performance. Complete the enquiry with the socket drawing, individual dimensions, material and production evidence, standard/class scope and documented service limits.