45 and 90-Degree Steel Pipe Elbow Material Enquiries
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model number2TechnicForged
-
ConnectivityWeldingshapeEqual
-
head codeHexagonOverall Length4 in
-
Height3Surface TreatmentPainting
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.25 inPipe FeaturesFlexible
-
Pipe ClassNot RatedApplicationAgricultural Irrigation, Automotive Repair, Power Industry, Heating Systems, Shipbuilding, Construction Engineering, petrochemical industry
-
Thread TypesNPTSizeCustomized Size
-
Product nameElbow
A pipe route may call for a 45-degree or a 90-degree elbow, but the required turn must be selected explicitly. This product has Stainless Steel, Alloy and Carbon Steel choices; confirm the angle for the intended material and size rather than assuming both turns are supplied for every selection.
Choose one turn angle for the route position
Mark the required elbow angle and centerline radius on the piping layout, with the adjoining pipe directions shown. Include the end positions and any space restrictions around the turn. A reference photograph of a curved fitting does not establish its measured angle or radius. Confirm the requested geometry as one arrangement so the elbow is reviewed for the specific change of direction needed in the route.
Check both elbow ends against their mating pipes
Provide the end sizes, wall thickness and connection specification at each pipe interface. Identify any welding preparation or thread requirement separately and obtain confirmation for the selected configuration. A single size choice cannot define the full end arrangement, and a general equal-end description does not replace actual dimensions. The elbow drawing should link the route angle to both mating connections rather than leaving the end details to assumption.
Request a service rating for the selected elbow
Name the material grade and any construction requirement that applies to the project, with the medium and design pressure and temperature included. An unrated class descriptor supplies no operating limit, so obtain the applicable rating for the proposed material, wall and geometry. Identify the inspection or material documentation needed for that review. The final angle-specific elbow enquiry should bring route, ends and grade together before service suitability is accepted for the part.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
